|11-20-2012 11:42 AM|
Thanks man thats what I needed...
|11-20-2012 11:41 AM|
Thanks Tex... the link below your post has them included......seems easy enough
Might read over the led thread since Im pulling the cluster
Thanks again all this is a great resource.......
|11-20-2012 07:45 AM|
|bardb||TJ Jeep Problem with Instrument Guages.|
|11-19-2012 09:16 PM|
|TexasTJ3016||Behind the instrument cluster. You will have to remove the instrument cluster to get to the connectors. Send me a PM with your email and I'll send you the directions.|
|11-19-2012 08:43 PM|
I forgot its a jeep thing lol...... just bang it
Ok where is the connector you are talking about? under the dash or behind the instruments cluster?
|11-19-2012 12:16 PM|
|11-19-2012 12:14 PM|
|TexasTJ3016||As a temporary quick fix/diagnostic tool, you can try emergency repair procedure #1. Give the top of the dash a solid wrap with your hand. If the dash works after that then see above.|
|11-19-2012 12:11 PM|
|TexasTJ3016||Same problem on my 2000. Fixed it by removing the Instrument Cluster, cleaned the contacts and bent them slightly to make better connection.|
|11-19-2012 12:03 PM|
intermittant dash/gauges ???? 99 TJ
My new to me 99 TJ has a intermittant problem with the dash. Sometimes on startup the dash comes on as normal and goes thru its light check then I have no dash indicators and the airbag light is on. Once restarting the vehicle cured it then today it acted up and I drove it 10 miles to town to the parts store (rear diff seal) it never worked and I racked up no miles on the trip odo.
Got parts and started home the dash came on normally but while driving home I saw it flash off .....then came back on. where should I look for a loose or bad connection?