|11-21-2012 04:36 PM|
Check this out as well.
|11-21-2012 04:30 PM|
this thread. They offer a number of 15" wheels that are guaranteed to fit.
|11-21-2012 04:19 PM|
|wildcard45||whats a good brand of alloy wheels to look into ?|
|11-21-2012 04:17 PM|
|wildcard45||ok sounds good i was told if i bought wheels that extended too far then i would create week points on the jeep wheel hubs|
|11-21-2012 04:10 PM|
For an 8" wide wheel, anything from 4.5" down to about 3" is considered "normal" for aftermarket wheels. If 15" wheels are what you want, then most alloys anywhere in that range should work, steels will have to be down in the 3.75" range and down.
|11-21-2012 04:05 PM|
|wildcard45||so whats a good back spacing to use if you want to get a bit more of a wider wheel base , but you dont want to weeken or create week points on your jeep|
|11-20-2012 02:10 PM|
|MTH||I have 15" wheels--Black Rock 909 alloys. Nothing was required other than buying the wheels and putting them on. Most 15" alloys fit. Most 15" steels fit so long as they're (I believe) 3.75" of backspacing or less.|
|11-20-2012 02:09 PM|
|wildcard45||excellent sounds like a easy fix , thanks|
|11-20-2012 01:55 PM|
as far as a process, just go out and by them. if you're not sure. talk to a rep at discount tire and ask them if the setup you're thinking about running would have any issues on a JK.
|11-20-2012 01:51 PM|
upgrading tires and Wheels
im upgrading my tires to either 33 or 35 X12.5 on 15 R , but my issue is that the 15'' rims wont fit on there due to the obvious , i currently have 16'' wheels what is the process to go to 15'' wheels or whats the best way to go about it?