|11-26-2012 06:49 AM|
|Katalst||The frame, engine, hood and grill are original. The diamond plate is aluminum. I am really not sure of the weight but I am also curious. Once I get it set up, I will try some SLOW country roads for the testing. I realize that this is just a short term solution but if it might work, then I would only have a little bit invested in the change so thought it might be worth a try.|
|11-25-2012 11:03 AM|
|11-24-2012 08:44 PM|
|div4gold||Thats pretty interesting body work.|
|11-24-2012 09:28 AM|
|Katalst||Thanks for the reminder on the brakes, you have seen me drive|
|11-23-2012 09:54 PM|
|4Jeepn||When flat towing.. stopping and panic stops become the issue. Just give yourself plenty of room.|
|11-23-2012 09:48 PM|
|div4gold||You got any pictures?|
|11-23-2012 08:07 PM|
|Katalst||The vehicle to be towed is/was a 1959 CJ but was heavily modified before I got it. Really only original parts are motor, axles, grill and hood. No windshield and entire hub was replaced with custom made aluminum. I don't think it weighs a whole lot (a relative term). But I will let you know how it does. May be a month or so before I get a chance as I will still need to work out the tow bar. Thanks to everyone for the information.|
|11-23-2012 01:41 PM|
|11-23-2012 01:21 PM|
|11-23-2012 12:51 PM|
The cluster gear in the bottom of the transmission is what circulates the gear lube to the mainshaft and everything else. If the mainshaft is allowed to turn like it would in neutral, the cluster will remain static and no lube would be available to the mainshaft/sliding hubs/front input shaft needles. With the Tcase in N and transmission in gear, nothing will move inside the transmission so it is not a problem.
I have flat towed over 700 miles one way in a day and absolutely no problems if transmission is in gear and Tcase in N. Keeping the front hubs locked out will make for easier towing and a little better mileage.
Will be interesting to see what your thoughts are with respect to towing with the 12. Don't know if the 3.6 has enough poop to maintain a reasonable highway speed with another Jeep tagging along.
|11-23-2012 12:04 PM|
|div4gold||What's the reason to have the transmission in gear?|
|11-23-2012 09:45 AM|
It shouldn't make a difference. T
There is no need to lock the front hubs you don't what the front driveshaft to turn.
|11-22-2012 09:01 PM|
|derf||It shouldn't make a difference.|
|11-22-2012 11:37 AM|
|div4gold||Does any of that change in relation to having the front hubs in or out?|
|11-22-2012 10:52 AM|
|derf||If you google flat towing with a Spicer 18 t-case, that's exactly what they suggest. Trans in gear, t-case in neutral.|
|11-22-2012 07:37 AM|
Flat towing a 1959
I have a 1959 willy. I also have a 2012 2 door sport. There is an off road park 70 miles from my house. I would like to tow the 59 there with the 2012. I have heard everything from no problem to it will cause the destruction of all mankind () and everything in between. Any good information would be helpful. So far, based upon what I believe it good information I am leaning toward doing it like this:
Transfer case in neutral
tranny in gear
(which is what manual says for new jeeps)
Any help is appreciated. Thanks.