Jeep Wrangler Forum - Reply to Topic
Jeep Wrangler Forum

Go Back   Jeep Wrangler Forum > TJ Jeep Wrangler Forum > TJ Tech Forum > Temp Guage

Join Wrangler Forum Today

Thread: Temp Guage Reply to Thread
Post Icons
You may choose an icon for your message from the following list:

Register Now

In order to be able to post messages on the Jeep Wrangler Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
Please enter a password for your user account. Note that passwords are case-sensitive.
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:


Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.

Additional Options
Miscellaneous Options

Topic Review (Newest First)
11-30-2012 10:45 PM
Rah1973 Well I replaced the gauge cluster and my problem is fixed. It also fixed a smaller issue of the speedo reading 10mph faster than I was actually going.
11-26-2012 09:47 PM
Rah1973 Well I replaced the sensor with no luck. I did make another discovery however. Through the course of checking and disassmebling I discovered that the instrumetn panel had been taken apart by the previous owner. I found that they had removed the cel. I think that while they did this they may have removed the need on the temp gauge thus making it read incorrectly. I ordered a new instrument cluster hoping this fixes my problem.
11-25-2012 07:58 PM
Rah1973 Well I did some testing. With the engine running I disconnected the harness to the coolant sensor and the guage moved up slightly, also the fan instantly comes on. Yes, when the key is off the guage moves down. I think your right it almost has to be the coolant sensor. I will get one tomorrow and relpace it and see what happens.

Thanks for the help and I will let you know how it goes.
11-25-2012 03:34 PM
RUBI 4 MY MRS I'm pretty sure there is only one sensor. It is connected to the PCM which then probably uses that signal for both functions.

I should have asked one more thing, does the gauge go down to the low end when the key is off or stay at 100 all the time?
11-25-2012 11:03 AM
Sherpa In years past (such as on my 1989 Plymouth Voyager), Chrysler used two temp sensors: a 2-wire sensor at the thermostat to control the radiator fan, and a separate 1-wire sensor for the coolant temp gauge. If your 2.4L is still like this, the sensor mentioned above won't be the cause. Look carefully on the cylinder head for any 1-wire connections.
11-25-2012 10:56 AM
Rah1973 Thanks for the reply. I thought that sensor sent the temp info to the computer to activate the fan and so on. Does it also work the guage? Maybe I should just change it and see if it makes a difference..
11-25-2012 02:29 AM
RUBI 4 MY MRS I think it is at the front of the engine on the driver's side near where the top radiator hose goes to the engine. Should be near the t-stat. 2 wires to it, dark blue/dark green & violet/orange. It should have variable resistance accross the 2 terminals as the temp changes.
11-25-2012 12:20 AM
Temp Guage

I've got a problem with the temp guage on my 05 with the 2.4l engine. For some reason the temp guage is not working. It just sit at 100deg. I have changed the t-stat with no change. I have read other post saying there is a sensor that goes to the guage but I have not seen any post mentioning the 2.4l engine. The engine is not overheating and the heater seems to be working fine. Any suggestion or info would be greatly appreciated.

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

All times are GMT -5. The time now is 04:36 PM.

Jeep®, Wrangler, Liberty, Wagoneer, Cherokee, and Grand Cherokee are copyrighted and trademarked to Chrysler Motors LLC. is not in any way associated with the Chrysler Motors LLC