|01-08-2009 07:21 PM|
I personally will only use Warn. It's just a personal preference based on how much we use our winches out here and the fact that I can get replacement parts for it should I need to pretty much anywhere in the country.
However I have seen good things out of that Smittybuilt winch. For 270 bucks I think it would do you well.
|01-08-2009 03:32 PM|
50+ pulls and my bad mouthed 10,000lb Harbor Freight winch has yet to fail.
|01-08-2009 03:06 PM|
|Jma20a||that's a little more than i have to spend. and as for a mounting plate i just ordered a new front and rear bumpers and the front has a mounting plate.|
|01-08-2009 02:22 PM|
I have the Superwinch Epi 9.0 (EPi9.0 Winch)
It's a little over $500 but also in considering this, you want to get whats right for you and strong enough for your needs.
Also consider if your bumper has a built in mount plate or if your running stock and need a mount plate.
Best of luck,
|01-08-2009 01:52 PM|
|01-08-2009 12:39 PM|
I have been really impressed by the Warn M-8000 that I got in 2008. I have actually used it, and it's worth its' weight in gold when you really need it. It is made by one of the oldest and most reputable manufacturers of winches, so it has a solid reputation. Quadratec and some of the other retailers run specials in the $500 range if you keep your eyes open.
Be aware that you may have to spend money on a mounting kit, fairlead and so on, since most winches have multiple applications. Don't go cheap when you mount it. I recommend using grade 8 hardware too. You don't want to experience a catastrophic failure because you used cheap hardware! You may also want to think about a battery upgrade to handle the pull from the winch. I use the Optima Yellow Top in 2 of my Jeeps!
Here's a pic of my Winch and my roller fairlead set-up:
|01-07-2009 07:10 PM|
or one of the smittybilt winches:
SmittyBilt Electric Winch - 8,000 to 10,500 lbs.
|01-07-2009 07:06 PM|
|Jma20a||will something like this work PEC8 Electric Winch|
|01-07-2009 06:40 PM|
thatīs not strong enough.
on the uppercable layer it pulls only 3300 lbs.
you should install a winch with at least 8000 or 9500 lbs. in some situations a 12.000 lbs winch isnīt enough.
|01-07-2009 05:41 PM|
i was looking at this PE6000 Electric Winch
i don't do much heavy wheeling.
|01-07-2009 05:36 PM|
|Coyote_94YJ||I would say a Warn, Superwinch or Ramsey 8000 lbs or more. The general rule of thumb is when picking a winch, take the weight of your rig and multiply by 2 and will give you a starting point.|
|01-07-2009 05:33 PM|
this would be my first choice:
|01-07-2009 05:08 PM|
i'm looking to get a winch for my tj and i have no clue what to look for. i have a 99 wangler with a 4 cylinder. i don't do a lot of wheeling so im not looking for anything fancy. my spending limit is under $500. any advice on where to start?