|11-30-2012 03:02 PM|
|11-30-2012 02:40 PM|
|11-30-2012 08:23 AM|
Take off shocks, disconnect sway bar and track bar.
After those parts have been removed the axle will bind on the lower control arm and while you should be able to easily remove the old springs you will likely need the compressor to get the new ones in.
Reverse the order.
Everything is the same on the rear axle except you will want to put the track bar relo bracket on while the axle is unloaded.
Also, don't forget the bumps top extensions.
|11-30-2012 08:07 AM|
Zone 3" lift install SOON.... advice first!
Soooo I'll be installing the Zone Offroad 3" suspension system on my 2001 Jeep Wrangler Sport soon and i'd like to get advice on installing this lift or advice in genral that I might need to know. I'll be using coil compressors and I know I won't have to lower the axle as far to remove the coils but what exactly do I not need to disconnect since I'm using compressors? When I install I'll do my best to get pictures and stuff so I'll post those here! Thanks!