|11-30-2012 08:20 PM|
I just pulled one of mine to show how it looks after one year. A little wear, but not too bad....should last a few more years.
|11-30-2012 04:22 PM|
Here is my writeup... http://www.wranglerforum.com/f5/diy-...one-99942.html
|11-30-2012 02:20 PM|
|11-30-2012 02:16 PM|
|tallzdatank||did your pin have slack in it? if so how much?|
|11-30-2012 02:13 PM|
I personally spot welded a big washer to the head of the pin, so mine will have to wear through the washer before it wears on the head of the pin.
|11-30-2012 02:09 PM|
|tallzdatank||so a 7/16 isn't quite tighten there, is that why his pin wore out so fast? I have access to a lathe, would it be more beneficial to turn pins out of say 4130 or 8630 or something stronger like that?|
|11-30-2012 01:56 PM|
Check this link out....easy to make and works well.
Jeep Homemade Swaybar Disconnects
|11-30-2012 01:55 PM|
Pretty good writeup on how to do it
|11-30-2012 01:51 PM|
sway bar discos
im looking at making some sway bar discos, but not sure how I want to do it, anybody got pics of how they did it?