|12-04-2012 07:20 PM|
|12-04-2012 07:02 PM|
|12-04-2012 06:40 PM|
|bengen1||My guess is they are Mamba Mr1's but those are 18 x 9|
|12-04-2012 06:36 PM|
If you want to keep them tho all you need is 5x4.5 to 5x5 adapter
|12-04-2012 06:23 PM|
|Jeep_88||Do you have any idea what they would be off of then? they're moab rims, I just don't know what it would be off if they're not off a TJ or JK.|
|12-04-2012 08:43 AM|
|Imped||Then they're not TJ Rubi wheels.|
|12-03-2012 01:50 PM|
|Jeep_88||They're actually 18'' X 8.5'' wide with a 4.5'' bolt pattern.|
|12-03-2012 11:22 AM|
|Imped||Being a 16" wheel should've been a dead giveaway.....|
|12-03-2012 11:08 AM|
|Lithium Lotus||I would just sell them and buy some aftermarket wheels.|
|12-03-2012 12:47 AM|
|Lusus_Naturae||Sell and buy Jk rims? I know there are adaptors, but for a little more you can have different wheels too. How about Craigslist for both? Are they stock TJ wheels or aftermarket? Stock with spacers won't stick out too bad, aftermarket might.|
|12-03-2012 12:09 AM|
TJ Rubi Rims on a JK Rubi?
Well I was dumb and listened to the guy I bought rims from telling me they were from a JK when in fact they were from a TJ Didn't bother to check until a couple months after I bought them when I was about to get winters put on them and I thought I would double check the rim size... at least I did that before I drove down to the US to get the tires put on
Anyway, I know I'll need spacers/adapters but what about back spacing, etc. will they work alright? and will the wheels stick out too far which would cause stone chips along side of the Jeep?
Any suggestions/thoughts would help... I can't find any JK rubi rims around here decently priced.
Thanks in advance.