|12-05-2012 05:13 AM|
|MrSig||and enjoy the forum!|
|12-04-2012 10:21 PM|
|silver rubi||Welcome to the forum! Good luck with the issue. I recommend Jerry B as well.|
|12-04-2012 09:58 PM|
|12-04-2012 09:37 PM|
|jokerchief462||Welcome to the forum and good luck on the swap!!!|
|12-04-2012 06:17 PM|
|dabolt55||Welcome, good luck with your issue...|
|12-04-2012 03:49 PM|
|12-04-2012 01:11 PM|
Because this is the newbie check-in area, you may not get the answers you are looking for. I suggest you check out this area and post you questions there:
TJ Jeep Wrangler Forum - Jeep Wrangler Forum
In the mean time . . .
Welcome to the forum!
|12-04-2012 10:53 AM|
Tranny Swap 99 Wrangler
Hey guys here's the situation I've got, and help would be greatly appreciated.
My project started out as a 99 TJ 4.0 automatic to be driven daily/ wheeled. The tranny was weak from day one and I had a PO743 TCC code. I already had everything needed to do a 5 speed manual tranny swap which went rather smooth and it runs and drives perfect now with no issues. With that being said even after clearing the code 3 times I am still getting the PO743 Torque Converter Circuit Electrical code. The torque converter obv doesn't exist in my jeep anymore since the recent swap. Did I miss something when I plugged my harness back into the tranny and transfer, faulty fuse or relay, something I have to change to let the ECM know of the swap?