|03-10-2009 01:27 PM|
|jgano23||that looks great.|
|03-10-2009 01:02 PM|
|nater344||I herculined my tub last year and it is holding up extremely well...no chips! It is nice to be able to hose the mud out! The prep work sounds similar and is definetly the most important part if you want all of your hard work to last.|
|03-10-2009 10:31 AM|
|jwm1986||You got 4 bottles of the stuff... So you do kind of layer it. I just used 3 bottles and just hit everything onceish. I wish I would have just used it all now tho and made it a lil thicker but oh well. Maybe someday i'll get another kit and second coat it all and do some accessories as well to match (fender flares!)|
|03-09-2009 06:12 PM|
|Giancarlo||do you spray like coats or just one coat is good?|
|03-09-2009 05:28 PM|
|dodgetk81||Ive had my Raptor since last spring. No chips or peels. I do use rubber mats on the front floor to block some of the heat. A couple tips. If you just need to scuff, use a brown 3m scotchbrite pad. In my opinion, much easier than sand paper. I also used the cheap foam ear plugs to block all the holes I didnt want liner in. Just roll em up and stick em in.|
|03-09-2009 05:14 PM|
|jwm1986||Update for those who care: I've had it on for about 2 months now and i'd say it was worth it.. It does have a couple "chips" now but it's still nice. Just doesn't hold up as well as say Rhino lining.|
|01-13-2009 11:02 AM|
Don't worry about screw holes, they will all thread back in with no trouble unless you purposely try to fill one in.
|01-13-2009 10:29 AM|
|Giancarlo||ive been looking into this product for about 3 monthes and im set on doing it this spring.. all i need to strip is center console seatbelts seats and subwoofer.. so for prep just hand sand and then chemical wipe down.. where are places not to spray?|
|01-13-2009 09:50 AM|
If your starting with nothing (ex. just took out carpet) all you really need to do is take some 180 grit sand paper (or similar) and lightly sand everything, scuffing mainly, don't try to cut through the paint. Then just take some chemical paint prep like the "Wipe All" that autozone sells to get any oils off the surface. Do yourself a favor and wear chemical resistant gloves during this whole process as well!
|01-12-2009 06:55 PM|
awesome! ive been looking for awhile at variour liners and havent been as impressed as i am with this.
how detailed was the preparation beforhand? how long did it take?
|01-12-2009 06:03 PM|
|01-12-2009 04:50 PM|
|01-12-2009 01:28 PM|
|01-12-2009 12:12 PM|
|01-12-2009 12:11 PM|
|01-12-2009 12:11 PM|
The guy who owned the Jeep previously attempted some kind of bed liner but it was Duplicolor something.. Well it's horrible. I could rub it off with my hands in some areas. NO PREP = FAIL ... It was nice, fresh, paint under it all. So long story short me and a couple friends stripped all the other "crap" out and I ordered a product called U-POL Raptor. I have seen it in this forum a couple times and seems people really like it.
Everything went VERY smoothly. Great price and got the stuff really quick. Only used 3 of the 4 bottles and sprayed around 38-40 psi.
Here's the pics, let me know what you think.