|12-15-2012 11:57 AM|
|Patrick H||It is not Rubicon only. Slater451 stated that his SE had one, and my Sport had one.|
|12-15-2012 11:38 AM|
|KaiserJeep||Yes it is Rubicon only. Most people remove them and sell them to other Jeepers when they fit a rear bumper with recovery points.|
|12-12-2012 04:48 AM|
|Slater451||That hook is a rubicon only part ???? My 06 SE 4 cyl came with one I had to take it off to put on my trailer hitch|
|12-12-2012 03:30 AM|
|KaiserJeep||That factory rear tow hook you show is specific to the TJ Rubicon model. I bought another one from another Forum member and I have one on each side. The mounting holes already exist, you will need to buy new bolts that are 1/2" longer for the passenger side.|
|12-11-2012 11:37 PM|
Get a pair of factory front tow hooks from a GMT400 truck. Err, 88-98 Chevy truck.
|12-11-2012 10:14 PM|
|Rubicondon53||You'll have to fabricate what you are looking for. and even at that it'll be difficult to impress upon your fabricator that they need to support, at minimum 3 tons without breaking.. If you're just pulling sleds, then a T bar slid into your receiver hitch with hooks on the ends would work. we used to do the same with hooks on the ends of the drawbar of our old John Deere... Those darned tube bumpers make a lot of rather easy things much more difficult than they otherwise are.. Good luck|
|12-11-2012 10:04 PM|
|12-11-2012 09:55 PM|
|Slater451||How about a trailer hitch with a d-ring attachment|
|12-11-2012 09:51 PM|
I do not want them both facing left. I don't like the smaller hooks because straps like to fall off with slack, and I ski/sled behind my jeep at 40-70MPH, frequently with slack. With the hook I have, the strap wedges slightly under the bumper nicely and doesn't fall off regardless of slack.
Are there any better options? Aftermarket solutions? I want two larger, curved C's (not small hooks) both angled toward the center.
|12-11-2012 09:44 PM|
|Michigunman||You could put one on the passenger side, but you wouldn't flip it. It would be oriented the same as the one on drivers side due to the shape of the frame there. So the hook would curve off to the left on both sides. If that bothers you and want both sides to be symmetrical you'd be better off just buying a couple basic tow hooks and mount them to the inside of the frame on each side.|
|12-11-2012 09:39 PM|
|12-11-2012 09:37 PM|
|Ehryk||Yeah, I'd need the same but bent the opposite direction, or an aftermarket pair, preferably. Does anyone make them, or is this something I'd have to have fabricated?|
|12-11-2012 09:34 PM|
|Slater451||Ohh mine was on the drivers side|
|12-11-2012 09:33 PM|
|Slater451||I've got one but it's in new York and I'm in Florida|
|12-11-2012 09:32 PM|
|12-11-2012 09:29 PM|
I'm starting to wonder if they aren't stock, given that no one seems to know what I'm talking about. I went out and took pictures:
And it's now clear that I can't get 2x of the same one, I want them bent down and in (I'll switch the one that's on there). I'd really like a pair of new ones, but they need to be low enough to clear the bumper so I can get a strap on and off. Would these have a different name than Rear Tow Hook? All I can find when I search for that is the smaller, cube style ones like I have on the front.
|12-11-2012 01:22 PM|
|12-11-2012 01:19 PM|
|Kota7x||I have both the driver/pass tow hooks that came off of my Jeep when I got it. They look like a cube with a "J" on the top (if that is what you are looking for) PM if interested.|
|12-11-2012 11:24 AM|
I'm asking: is the passenger side frame set up to accept one just like it? If so, can I get an identical one and flip it over, or would I need a passenger side specific hook?
Additionally, where I can get one of those? I do not see them sold anywhere. Are they called something different?
|12-10-2012 07:24 AM|
Tow Hooks, front or rear?
For the rear, my son went onto a farm tractor supply website and got a pair of awsome hooks for the rear. The stock one on my Rubi was broken.
Haven't put them on yet though...
|12-09-2012 09:50 AM|
|12-09-2012 09:49 AM|
|TJspeed||Google has been a good place to search for items like that...... http://www.google.com/search?hl=en&r...p+tj+tow+hooks|
|12-09-2012 09:32 AM|
Errrrrrrrrrr don't know what you have on the driver's side
|12-09-2012 01:39 AM|
Where can I get a passenger side tow hook to match the driver's side?
I'm wondering where I can either:
a) get the same part as the driver's side somewhere, flip it over, and bolt it to the passenger side,
b) get a passenger side hook that looks like the driver's side, or
c) get two matching hooks together that match.
Anyone have sources on either of these options?