|01-21-2009 11:33 AM|
I would definately say D60s front/rear otherwise use the Moog Portals, since then you would only need like a 3-4" lift kit.
Diesel enginer, either the CRD like the Grand other wise a Cummings diesel (6) to keep the weight down.
|01-21-2009 10:01 AM|
|G-Pur||I like the idea of dual front fender mounted 40 caliber fully automatic machine guns to help clear the traffic, er... I mean brush from your path.|
|01-21-2009 08:54 AM|
|01-21-2009 08:49 AM|
For that matter, have options to include:
- full width
- tire selection
I also like the idea of being able to select your ride height. Would be cool to, in the city, have a lower COG, then on the trail hit a button and raise that for clearance.
Trouble is that Jeeps are too customizable. People build them for their own needs. What might be best is to look at all the categories out there (rock crawlers, mud boggers, mall crawlers, barbie jeeps, etc), find what is common between all of them and offer that. Then have factory upgrade paths down the different categories.
Dunno. Interesting question. Post up your final result when you complete it.
Oh! Since it'll be available in 2020...make it hover!
|01-21-2009 04:28 AM|
Dana60 front and rear axles, locked rear
offroad bumpers w/ winch
6inch long-arm lift stock
35" mud-terrains stock
full roll cage/5point harnesses
|01-20-2009 04:15 PM|
Fender/wheel-well clearance for 40's from the factory or with minimal mods.
Factory cage - not another sport bar
Push the front axle forward and the rear axle back as far as possible to improve approach/departure angels.
FLAT skid plate / belly
Boat side rockers
Mirrors attached to body so doors can be removed and still be legal
How about removable door skins with tube doors underneath?
4 wheel disks - big strong brakes to stop a 3 spd t-case 2:1/4:1/6:1
5.0 straight six - EFI
5spd manual is fine
F and R axles with removable 3rd member like a Ford 9"
I think it still needs to seat four.
Flush tail lights
Factory rock lights
Factory fogs up by the windshield
|01-20-2009 04:00 PM|
Here are a few ideas of mine:
1. CTIS! Constant Tire Inflation System
I remember the military cargo trucks I used to drive years back had air systems that you could control from the cab, letting you air down (OR UP) with the push of a button.
2. It's been mentioned already but IMO rear steer would ROCK! Especially for a longer wheelbase vehicle like the JK Unlimited.
3. Phnumatic (or hydraulic) suspension system for a dynamic lift. ( I have no idea how this would actually work) BUT imagine rolling with 2" of lift on the street, hit the trail, mash a button and BAM you got 6" of lift!
Hmmm, gears are turning now
|01-20-2009 12:01 AM|
|wavebacktothetj||Stock full factory roll cages, and disconnecting windshield (so you can have added protection and visibility) and perhaps an internal snorkel using the side roll bar, all this should be the 2020 Rubicon package|
|01-19-2009 10:57 PM|
|chesterspl||Whatever it is, keep the engine design simple. I hate working on a car where they wedge some complicated motor in with butter and a shoehorn. I like the jeep motors b/c they are basic and easy to get to.|
|01-19-2009 09:30 PM|
|01-19-2009 09:27 PM|
|memphismike||IMO there isn't much you could do asthetically, it does have to look like a Jeep afterall. I do agree that it needs real bumpers, fenders and side protection. Powerwise the Wrangler needs a motor that has tons of low end torque be it diesel or gas. Making the D44 the standard axle and having a D60 as an option would be cool too. Really the best way to get ideas is to look around and see what folks change on the current models.|
|01-19-2009 08:00 PM|
|Dare2BSquare||Too bad trip deleted his pics from his photobucket account. He had a super idea for aerodynamics on the front!!!|
|01-19-2009 07:47 PM|
|Fichoto||awesome! thank you for your suggestions guys...keep them coming if you have more. I definitely think a retractable soft top and 4-wheel steering are intriguing ideas. I really want to make it little more aggressive looking too. How do you feel on making it smaller,perhaps even making it a one-seater?...even like a buggy but keeping the jeep heritage?|
|01-19-2009 02:29 PM|
|autogyver||factory built in winch front and rear, to help out the hummers...|
|01-19-2009 12:11 PM|
|the9deuce||i definitely like the idea of a retractable soft top.|
|01-19-2009 11:35 AM|
|BILLG||How about a 2020 TJ|
|01-19-2009 11:33 AM|
No bling. Like said above, it ain't a hummer but then, the new hummers aren't hummers either IMO.
The front seat on the two door needs to flip up like the older models and make it easier for the rear passenger to get in. Not totally crucial but I had to ride in the backseat one day and my old fat ass had a heck of a time getting in and out while waiting for my fumbling hubby to figure out how to move the seat forward so I could!
|01-18-2009 09:54 PM|
|Sb5551||Deisel is a definate. Get rid of the cheap axles also a definate. Looking at the JK stop adding all the plastic. A real front bumper goes a long way.|
|01-18-2009 09:49 PM|
|01-18-2009 08:52 PM|
No more cheap ass axles like the D30/35!!!
Soft tops are a must, jeep always had them and always will.
No BLING crap either. These are not Hummers.
|01-18-2009 08:25 PM|
gm 4 wheel steer trucks didn't catch on, i remember that, never actually seen one yet. wonder what happened.
brake friction power generation.
|01-18-2009 08:21 PM|
How about improved turning radius by adding in factory rear steer axles like GM did in some of the trucks. I'd also like to see the stock Wrangler be built with about a 100" wheelbase.
Next generation fueling and re-generation system that still keeps trail functionality. Maybe something where the turning of the driveshafts can generate electricity for the vehicle providing an endless power supply.
|01-18-2009 08:17 PM|
i say a soft top that automatically folds down. or a way that a hard top can be lowered off the jeep with the on board bracketry. hard tops are hard to remove by yourself.
factory on board air and welder
factory tool boxes, kinda like work trucks built in.
winch is mandatory
everything the rubi has
|01-18-2009 08:11 PM|
Jeep(Wrangler) lovers,help a designer
I am an automotive design student, and I am designing a Wrangler for the year 2020. I need your honest opinion on what you like/dont like/wish your Jeep had....and dont be afraid to be creative with your suggestions! This is the time to spill out all your wishes for what you want your future Wrangler to look like. I really want to create the ideal Wrangler...help me do so.
Thanks a lot