|11-13-2006 06:23 PM|
Oil Pump Sending Unit
Mine is a 93 4banger and when we replaced the sending unit it had ruptured and was leaking oil all over the side of the block.
It was that way when we bought it. That took some time to track down as the oil PSI gauge stood at zero. We did have to
buy a special deep well socket with a notch to remove and reinstall the sending unit. Replaced with an aftermarket unit that worked about 3 months, now idels at 40 psi and pegs at speed. Local 4WD shop suggested replacing with oem unit. Thats on the to do list, BUT Ill check the actual oil PSI with a test gauge just to be sure of actual PSI at idle and reved.
Hope this helps
|11-13-2006 06:18 PM|
|donald||Thanks I will go out there tomarrow and look to see if that is were mine is.|
|11-13-2006 07:55 AM|
I have a 91 wrangler with a 4.0 engine.
Mine is on the lower right side of the engine in front of the the oil filter.
|11-11-2006 07:04 PM|
Oil pump sending unit
I need help locating my oil pump sending unit I think I found it but want to make sure anyone help?