|12-23-2012 10:35 PM|
|12-16-2012 07:20 PM|
|Sycboi||Really nice job man...|
|12-16-2012 06:58 PM|
I forgot to update this thread with the finished product.
I have wired a 4 pin trailer connector, towed and recovered with the bumper.
|09-16-2012 10:45 PM|
Simple YJ rear bumper
I want to keep the stock look, so I built this bumper. 1/4" thick 2"x4" square tube 5' long. 2" receiver welded both sides. Ends caped off with 14ga sheet. Mounted with stock frame holes to accomadate the stock bumperettes.
About $35 invested
$20 for tube, $5 for bolts, $5 for paint, $5 for wire.
4 hours time invested.
Receiver and bumperettes were free.
first mock up
24 holes drilled and 8 cuts made
Where the receiver tube came from
Back ground smooth to fit tight on frame
Final fitting before paint