|01-23-2009 07:45 AM|
If you cannot locate your stamp,or tag you can count the rotatation's on your tire/drive shaft. Open dif you will need a friend. here is a link:
YouTube - How to Calculate a Rear Differential Gear Ratio
|01-23-2009 06:35 AM|
|01-22-2009 02:48 PM|
|01-22-2009 02:42 PM|
|trumsey07||I checked mine andit was stamped 4.11 and its a 4 cyl|
|01-22-2009 06:18 AM|
|Lancem||4 cyl auto 3.73 at least in the one I have|
|01-22-2009 01:31 AM|
I was under the impression that all 4 Cyl YJ's got 4.10's. 6 cylinder versions could have either 3.07, 3.54, or 3.73.
You can always be sure for yourself with one of three ways. If the metal tag is still bolted onto your diff cover it will say there. 2nd would be to jack up the rear end, mark the drive shaft and then spin the tire until it makes one complete rotation. Count the number of revolutions the drive shaft makes and that is your ratio. The third would be to pop the diff cover and count the numer of teeth on the pinion and then divide that by the number of teeth on the ring gear.
|01-22-2009 01:12 AM|
|thebucky84||hmmm, someone has to know!! haha... well mine is a 2.5l 4 speed and curious as to what i have...|
|01-21-2009 11:21 PM|
|jpdocdave||i was hopin someone knew for sure, i thought they were different. 5spd is 4.11 100% auto is usually geared a little higher|
|01-21-2009 11:08 PM|
|thebucky84||so does the 4 speeds have different gearing then?|
|01-21-2009 05:56 PM|
|jpdocdave||whatever the vehicle, the front and rears are geared the same, or within .01.|
|01-21-2009 05:22 PM|
What about the front
diff in a four cyl
|01-21-2009 05:04 PM|
|thebucky84||what about the 4 speed? or is it the same?|
|01-21-2009 01:36 PM|
|01-19-2009 06:20 PM|
|jpdocdave||if its a 5 spd, you have 4.11 gears, if its auto i forgot off the top of my head.|
|01-19-2009 04:15 PM|
What Gears do I have?
What does my '95 4cyl have for rearend gears?