|01-24-2009 11:53 PM|
|01-24-2009 09:29 PM|
|DarylJHewitt||You will mostly likley need to use the ECU from the 04 engine and im not sure whether or not the wiring harnesses are compatable you may need to change that as well.|
|01-24-2009 09:19 PM|
|slf41002||That is why you would use the 4L60 or 700R4 tranny and NOT the one from the 4 cyl!!!!|
|01-24-2009 02:29 PM|
|Giancarlo||swapping in a chevy is not as simple as swapping a straight six.. the 4 bangers tranny will be to weak for that motor|
|01-24-2009 12:22 PM|
|ExDementia||If your already going through all the work why not put a 6 or bigger in? If you swap in a Chevy 5.3 out of a 1500 series, you will get probably about the same mpg, but with more than double the power your I4 made.|
|01-24-2009 11:16 AM|
|Giancarlo||well the engines wiring and ignition system will be different|
|01-23-2009 07:57 PM|
|slf41002||We do not have very many Wranglers in my town and no 4 bangers at all.huhhh are the 2.4 and 2.5 the same other than the bore???????|
|01-23-2009 07:54 PM|
|slf41002||flattie tj is correct the 04 is a 2.4L so i am really not sure if it will swap for the 2.5!!!|
|01-23-2009 07:45 PM|
|slf41002||Just going to bump because I am not 100% sure but I would say the engines are the same although you may have to use your intake and a few other thing from your original engine.But I think the engines are the same.But like I said with the 4cyl I am not 100% sure of that.|
|01-23-2009 07:44 PM|
|flattietj||upgrade to a 6 while your in there.......you will be much happier......i think the 04 will be a 2.4l and be different|
|01-23-2009 05:17 PM|
2004 Engine in a 97?
Hey guys, I'm new to the whole aspect of asking about this stuff online but being a little pressed for money right now has made me reconsider.
Okay ive got a 97 wrangler TJ 4 cylinder and i blew the engine at 190k miles on it. now ive found a 2004 4 cylinder engine for a cheap price, and i need to know if it will work before i buy it. any help??