|11-16-2006 09:32 AM|
I run ARB's front and rear. They run off an air compressor mounted high in the engine bay. You can use either a blue plastic line or a steel line that plugs into the axle housing. Then I have 3 switches mounted in the jeep, one for the compessor and two for the lockers. The cable lockers such as OX lockers have gotten better, I recall some ealry one's that had engaugement issues. Think parking brake line, as you use it it tends to slip a bit, thus the ox line would slip and not allow for full mesh of the parts.
One other item to keep in mind, if you have the dana 35 rear, a locker back there is going to put a lot of stress on that axle. It tends to blow up when that happens, You many wish to upgrade your axle shafts to help with this.
|11-16-2006 07:39 AM|
|jeeperman||ARB's are air lockers. I had one for several years, with many submersions, and never had an issue with it... The cable lockers are fine, but what I have heard about them is that they are a bit touchy (at least they used to be) and it can be difficult to route the cable just right to get easy operation/engagement out of them.|
|11-15-2006 10:40 PM|
|mrbigjeep||arb is an air locker. you got to have a source of air to use it. i think you use some type of on board compressor. i hear a lot of good things about ARB's. they are expensive though|
|11-15-2006 09:14 PM|
|rebelBullDawg325||are they air? electronic? cable? i'd really like cable, seems like it'd be the hardest to mess up|
|11-15-2006 09:11 PM|
|bluvikng||IMO.......stands for, " In My Opinion", so back to my first statement.............ARB's are the best selectable locker.|
|11-15-2006 09:08 PM|
|rebelBullDawg325||1st off, on a side not, i see IMO alot, whats it mean? back to the lockers, i'm sure they have come along way, but i jsut have trouble convincing myself to use anything electronic that may be submerged from time to time.... call me old fashion|
|11-15-2006 09:05 PM|
|bluvikng||ARB, is the best on the market, IMO...........electric lockers have also come a long way.|
|11-15-2006 09:02 PM|
i'm lookin to get selectable lockers (front and rear) for my 91 YJ. stock axles i'm pretty sure. what lockers should i look into?