|06-07-2012 10:48 AM|
|Neil F.||ahhhhhhhhhhhh what's the point of quoting the above?|
|06-07-2012 10:24 AM|
|01-28-2011 10:57 AM|
|NUTnOUT||changed the lights around and it works awesome now.|
|01-27-2011 04:28 PM|
QUITE possible... i would look to see where the dark spots are (easier at night) and pull off the cluster, pull the light closest to that area, turn it and put it back in, put the cluster back, and CHECK IT... if its brighter then that was the problem... if its worse, then you may want to switch it back to the way it was originally....
Let me know if you have any questions... (i got pretty good at switching them back and forth)
|01-27-2011 04:21 PM|
|NUTnOUT||im asking if i have dead spots in my cluster because maybe a couple of the ones are installed with the wrong polarity and are not working|
|01-27-2011 09:40 AM|
|KawiMonsterSahara||if you are refering to me, then, yeah i checked the polarity. all is good... when its really dark out i love it.... just kinda sucks in between day and night|
|01-27-2011 09:37 AM|
|NUTnOUT||do the led's you installed in your gauge cluster have to be installed with the correct polarity also? I tried this and it seems like i have some dead spots. when i switched out my hvac i noticed the polarity had to be a certain way in order for the leds to work.|
|01-12-2011 12:52 PM|
I DID thanks...
I'm guessing that its the best i can get (at least for now) which isnt HORRIBLE and it has color now... its just not as bright as id like it to be
|01-12-2011 12:28 PM|
|Neil F.||Did you order the correct bulbs? I have not read into the LED changeout but what little I have skimmed over here and this larger thread Gauge Cluster LED Install - JeepForum.com there are a number of different style with multi and angled LEDs which affect the illumination.|
|01-12-2011 11:18 AM|
|KawiMonsterSahara||AND its really splotchy(?)|
|01-12-2011 11:17 AM|
I expected them to be REALLY bright (the picture looks better than it really is)... \
Especially not impressed with the A/C controls.
|01-12-2011 11:15 AM|
|Neil F.||Ok, looked at the pictures. Without you saying what is wrong, you can't tell from the pictures.|
|01-12-2011 10:49 AM|
See it on my profile:
|01-12-2011 10:25 AM|
Am I the only one who doesnt like the results from my LED replacement bulbs?
I bought them from VLEDS.COM and was stoked about having some BRIGHT green lights in my dash. However, the results were pretty dissappointing...
|10-04-2010 09:47 AM|
my mom has a yj 95 i think it could be a 94 and its green i am going to put the uv/purple LEDs #74 bulb. I am not going to tell her I just asked if I can use it this weekend and am going to surprise her I hope he likes it. I think the purple looks cool and not a lot of people use it most people use a blue and purple will look good in a women’s jeep
she is going to be so pissed if I break something
what LED would fit in a TJ 06 I think I am going to get one before winter. After having one last winter I don’t want to go back to my little s10 that is not so great in the snow
|10-02-2010 07:19 PM|
I guess that could go either way if she hasn't given you permission.
Just as long as you don't break anything in the process,
she'll probably be pleased with the outcome.
What color are you doing hers?
|10-02-2010 10:37 AM|
|redlinepilot||ok i just got some LEDs online (i should get them befor next weekend) that i think will work so i can do this to my moms jeep i hope shes not going to be pissed|
|10-02-2010 10:21 AM|
|redlinepilot||its to bad i totaled my jeep because this looks like something cool to do|
|07-31-2009 08:58 PM|
|Giancarlo||i need the wire for the trans shifter does anyone know where i can get it?|
|06-02-2009 03:32 AM|
I bought 7, but just used 5.
5 is all you need for the basic color change.
I got kinda lucky because I found that same size goes in my HVAC,
so I used the other two in there.
(I have a 98 btw, with the old slider controls)
|06-01-2009 10:48 PM|
yah actually did it on the regular paint application off the desktop, my photoshop is at the rents....
about the cluster...Let's hope that's not the case. i was basically too lazy and affraid that taking the guage back out would give me another issue with the connections and guage funtions. tomorrow ill have the dielectric grease around and can mess with it then. When you put your lights in how many bulbs did you use?
|06-01-2009 10:13 PM|
I guess you photoshoped the color combo?
Now that I'm thinking about it, I'm not sure that will work.
I'm not positive, but I don't think there's a barrier inside the cluster for you to be able to separate colors in that way.
However, there ARE barriers for your blinkers, high-beam, and warning lights.
So you could play with different colors on those I think.
The top 3 are your left/right blinkers and the center one is your high-beam.
Hope that helps a little.
|06-01-2009 09:15 PM|
It depends on where you're putting it.
Make sure it's not too long or too wide.[/QUOTE]
Agreed, I checked the dimensions of the ones you used and others mentioned from audulumination, v-led, and superbright, they're all pretty much the same size give or take 1 or 2 mm. So i'm hoping these will fit. plus it also seemed like these guys have their stuff together with customer service so if i have problems it shouldnt be an issue to resolve. and at $30 for the lights and shipping, i'm not gonna complain yet!
Blacktooth, do you know which spots behind the cluster go to which guages? i made a request a couple post up but no one responeded. Thanks!
|06-01-2009 08:54 PM|
Make sure it's not too long or too wide.
|06-01-2009 06:02 PM|
Will this bulb work???
www.LEDwholesalers.com - 3 SMT LED 74 T5 Mini-Wedge Bulb White
it just looks a little bit different from the rest of them, the base is the same size so i can't imagine why it wouldn't....
|05-31-2009 09:13 PM|
Don't make fun, but i had a little free time this evening and decided to play around with some ideas and came up with this... definitely click the pic to see it as a larger image.... opinions?
|05-31-2009 07:54 PM|
Ive wanted to replace the "foot lights" or the lights when you open the doors that light up the foot area with some blue led light sticks they sell at Murrays. Could i just splice wires together to get it to work? anyone done this? thanks
|05-31-2009 06:46 PM|
which bulb goes....
So i'm going to go with LED's in the cluster sometime very soon. I just have to choose what colors i'm going to go with. I currently have an alpine cda 7875 heres a link to a pic. the blue buttons are nice and bright at night.
now, since the faceplate is basically blue, white & some amber accents, i'm thinking about going with super white and then another color in the dashboard cluster since one color will drive me crazy after a while. however, which bulbs goes to which guages? is it possible to do the two small bottom corner guages different from the top corner guage colors? since i dont have an owners manual im relying on you guys and gals! i was also going to change the turn signal color. thankssss.
Also, is it possible to do two colors in the AC/Heat/Fan dash? I would like to go blue for the command plate and then amber for the temperature faceplate. (thinking that these will be the colors i choose for the cluster as well)...
|04-04-2009 09:33 PM|
It's been 24hrs......uuuuggggg.....still in recovery...lol.
|04-03-2009 09:16 PM|
|tdm||You're a bit late Black...I'm already on my 3rd Jack & Coke|
|This thread has more than 30 replies. Click here to review the whole thread.|