|02-18-2013 01:46 PM|
|01-22-2013 11:42 AM|
|01-22-2013 10:45 AM|
So protect yourself before you send these things out.
|01-22-2013 10:38 AM|
|TJake01||Not quite sure yet. Possibly dune shims out of 1" square tubing|
|01-22-2013 10:24 AM|
|sandfox4||what are you doing for the grill bumpers and dropping the radiator ? and what is the diameter of these puck's ?|
|01-21-2013 09:36 PM|
|TJake01||Hey everyone! Thanks for the emails, sorry it may have taken a few days for a response. I had a pretty busy week at work and did not get a lot of work done. but I will be running up to my metals supermarket and picking up some flat stock for the transfercase linkage drop brackets. Keep me in mind guys. Thanks and lemme know of any questions.|
|01-19-2013 08:12 PM|
|01-19-2013 07:57 PM|
|01-19-2013 07:49 PM|
|01-19-2013 06:59 PM|
|Aviation3295||I might be interested! If you have pics.|
|01-19-2013 02:22 PM|
|01-15-2013 07:31 PM|
I just set up an e-mail account, so for everyone that is interested please email me at JG.custom.auto@gmail Please give me the year or your wrangler and any other contact information you care to leave me for now.
|01-15-2013 07:15 PM|
|Jwolfer||I am interested depending on price. Looks good so far!|
|01-15-2013 07:08 PM|
|TJake01||Still working out a price. Keep in tune though and thanks for your interest!|
|01-15-2013 06:52 PM|
|4cylToy||Sweet! Would love a set. Have a price yet for em?|
|01-15-2013 06:34 PM|
|TJake01||here is the semi-finished product. A little work on the belt sander and the should be about good. just showing some progress|
|01-15-2013 09:07 AM|
|TJake01||I'll post some pictures later today but I got enough pucks cut and drilled for 2 Wranglers. Just need to smooth out and gather hardware. Also going to try fabing some transfer case linkage brackets.|
|01-14-2013 01:07 PM|
|brandon-99tj||I would also very possibly be interested in a 1.25" BL. Im glad to see one that will hopefully be within my budget|
|01-14-2013 12:08 PM|
|Powerman06||Id be interested in a bl. Tack me onto the growing list!|
|01-13-2013 10:18 PM|
|TJake01||Well here's a picture of the first nights work on the body lift pucks. Pay no attention to the up left, I know its a little lopsided, all will be solved. Slow and steady. Gonna cut some more after work tomorrow and hopefully drill some holes.|
|01-12-2013 01:47 PM|
|TJake01||I'm not a big believer in t case dips but they look easy enough to make.|
|01-12-2013 12:45 PM|
|Trevor C 98tj||You should also try t case dropes|
|01-12-2013 09:36 AM|
|01-12-2013 09:03 AM|
|TJNewbie||Once you get pics and prices, I might be interested in 1.25" BL/MML for a 4.0L 3 spd auto.|
|01-12-2013 08:53 AM|
Thank you everyone for your interest. I got a handful of the pucks rough cut last night for the body lifts. Will do some more tonight. I'm ferrying a lit more feed back than I expected, which is a good thing. So please be patient as I fine tune the process. Again I will shoot for a limited trial run by the end of next month. Thanks again.
I'll contact everyone who expressed interest once I have time to sit at my computer for awhile.
|01-12-2013 03:33 AM|
|01-12-2013 03:32 AM|
|krisbman||Im interested in the 1" BL. Shoot me a price|
|01-12-2013 03:19 AM|
I'd be interested in the seat risers and the 1" B.L.
|01-12-2013 12:01 AM|
Let me know if you need any "Beta testers" let me know and I'll give a hand.
I'm in Lake Havasu City, AZ and we do lots of off roading around here!!
|01-11-2013 10:17 PM|
Can you make a MML too? If so I'd be interested in all three.
Motor mount lift
Sounds like a good combo to me
|This thread has more than 30 replies. Click here to review the whole thread.|