|12-03-2013 12:19 PM|
I went to Rally and ordered the harness HL28130J, mainly because I became too busy to solder it up myself.
I have the trucklight, then from that being in Canada, BC to be more precise I turned off my headlights and run my sportlights as my daytime running lights with 5W High Power CREE LED bulbs.
This has worked out great for me and I have had no issues with either the speakers or the harness.
|12-02-2013 09:30 AM|
|12-02-2013 01:38 AM|
|12-02-2013 01:06 AM|
|12-02-2013 01:03 AM|
|relyt||Headlight revolution and tlg are the same company. I went with the trucklite harness. I have no complaints at all with it.|
|12-02-2013 01:00 AM|
Looks like TLG is now selling the harness made by Headlight Revolution.
Haven't shopped around yet, but HR is selling it cheaper on their own site, beating TLG's price.
EDIT: Purchase from HR and use code "JeepsOnTrails" and get $15 off, which negates the shipping cost. So I'm looking at about $70 to my door.
|12-02-2013 12:51 AM|
Hate to raise an old thread, but as anyone determined the best flicker harness to get now? Did TLG ever turn things around? I'm also seeing a harness from Headlight Revolution.
Anyone have any opinions and what harness I should go with?
|03-24-2013 03:09 PM|
|03-24-2013 12:59 PM|
|schiesz||I'd love to try the DIY, i'm just like that... But where do you get the H13 and H4 connectors?|
|03-18-2013 07:11 PM|
You need this:
1 H13 Connecter
2 H4 Conectors
2 12v 30a Relays
Misc Spade & O-Ring Connectors
|03-18-2013 06:11 PM|
Blinding people is not bad, I have D2's and have order the 6" to go down by my winch ;-)
But ya i can use it anywho, thanks for the good description on how to do this.
The DIY looks idiot proof
|03-18-2013 05:49 PM|
When you install the harness, the DRL's will go from 'flickering' to being full-power brights. In Canada, Jeep programs our lights so that the DRL's are actually our brights at half-power. The harness will eliminate the flicker, but you'll need the Procal to reprogram the Jeep so you're not blinding everyone. Take all of this from someone who JUST went through this.
^ That thread might help you out in terms of building your own harness.
|03-18-2013 05:43 PM|
Okay i will take a look back and see if i can find the material needed, i see your picture and the parts is that all that is needed, i ordered the ProCal it looks like i can change my programming through that.
If you have a better break down or a shopping list of the parts that would help me alot.
Appreciate it guys.
|03-18-2013 04:30 PM|
That Info can be Found here: http://www.mp3car.com/imagehosting/1...9129233622.bmp
Everything else is Self Explanatory.
|03-18-2013 02:08 PM|
|03-18-2013 11:51 AM|
|BCJKJeep||Ya i agree, but some of us (me sadly included) are scared to blow up their Jeeps|
|03-18-2013 11:38 AM|
It still Baffles me at how much these Companies Charge for a Simple Relay Harness.
Something that Costs Less than $20 to make, and they Charge almost $175...and people ACTUALLY Buy it.
|03-17-2013 10:24 PM|
This harness shown here looks better than what i have seen pictured in this thread so far,
Susquehanna MotorSports - Auto Performance Product
|03-17-2013 07:07 PM|
I got the "New" Harness from them in the Mail the other Day.
Dunno why they sent it to me either?
The Plugs are of better Quality (Not just Bulbs with the Glass Broke Off and Wire Soldered to the Leads by a 2nd Grader like the last POS's I got from them), but it's still just 2 Caps in some Heat-Shrink that is so stiff you can't Bend it, so even IF I was going to Install them, I dunno how good it would work without something on the Harness Breaking from being too Stiff.
|03-17-2013 05:30 PM|
Ya after I have more intel, I will get the stuff mentioned above and let others know how it works.
With the stock lights being so pathetic I need to keep what I have kow and fix the DRL asap.
The new Truck Lites I have are such I great improvement I cannot go back to the stock ones.
|03-17-2013 05:09 PM|
|03-17-2013 03:46 PM|
|03-17-2013 02:59 PM|
|03-17-2013 02:56 PM|
It worked using that harness?
The one i have is just an adapter from the old lights to the new lights sold with the kit.
How much was the harness you got and do you know the part number ?
Just so i know which one to get as the have quite a few.
Thanks Guys ;-)
|03-17-2013 02:48 PM|
|JKUCRUSHMIKE||I'm in Canada with trucklites, rally light harness and a procal. I have no flicker and use my signal lights as DRL. I love it.|
|03-17-2013 02:23 PM|
|stuggin||Buy a ProCal and change it. I fixed the flicker by making my own harness but then instead of flicker I had full-power hi-beams on my DRL. I bought a ProCal and changed the DRL to lo-beams, took all of 30 seconds.|
|03-17-2013 01:20 PM|
Bringing this back alive again, I live in Canada and have the New truck Lite LED headlights.
Now by law i must run the Day Time Running Lights, but i am trying to figure out how to fix the massive flickering i get when i am running these LED's on DTRL mode.
Right now i just run my headlights, but when wifey drives my Jeep she does not remember and it flickers like crazy.
My thought is the rule just says to have DTRL's not what lights will light up, anyone have any ideas on how to power up my stock driving lights in the front bumper?
Or if anyone knows of a fix for the DTRL, i would go that way in a heartbeat.
Thanks for any input, below are the lights in question.
|01-30-2013 11:23 AM|
Had to File a Claim to get a Response from them.
I'm just gonna Send it Back and get my Money Back.
They even openly Admitted on their Facebook Page that these DO WORK for the JW Lights but the Trucklites still have a Problem.
|01-30-2013 05:07 AM|
|01-30-2013 03:52 AM|
|relyt||I just ordered the Gen 2 harness, and I'm just hoping the problems outlined above are fixed now. I'll report back when I get the harness and get the lights installed.|
|This thread has more than 30 replies. Click here to review the whole thread.|