|02-12-2009 04:52 PM|
|chasm||Same here... I use an old mover's quilt to keep them from scratching each other or banging around. You can pop them back in fast and not worry about the big screws if you are gonna take them right off after work.|
|02-12-2009 03:39 PM|
|xxxxxxxxdavem||why wouldnt u just put the freedom top front panels back in @work then pop em out after. thats what we do. doesnt take very long.they will lay flat on the back floor or ive stood them up against the back seat and held them with a bungee strap. i just put a big beach towel between them to keep from rubbing together.|
|02-12-2009 03:24 PM|
I don't know if they are available on the JK, but back on my old YJ I had a bikini top that I would just pull the front out from the windshield ridge and fold it back on itself when I put the hard top back on.
If the bikini tops will work that way on the JK you could just leave it on all the time folded back and when you have the front of the hardtop off pull the front of the bikini top forward and connect it back to the windshield.
|02-12-2009 08:32 AM|
Bikini Top Option with Hard Top??
Hi all do any owners of the 3 piece hard top have a solution for a bikini type cover to be used when you take off the 2 front hard top pieces. Just to protect the interior while at work??