|01-17-2013 10:54 AM|
What I would like is not to paint it, but replace it by real wood parts. Like I have in my Audi.
Not just a poor plastic that looks like wood, but replace it with real handmade wood parts.
|01-17-2013 10:20 AM|
|01-17-2013 04:31 AM|
Make sure the surface is completely clean of all oil, armor all etc other wise the paint will fish eye.
You should primer the surface to allow,the color coat to bond to the surface. Also depending on the color you may need a light or dark primer.
Are you using color match paint? Is it single or dual stage or are you using krylon?
If its just krylon, then paint away.
If its a color match, that's different. Read the accompanying documentation that comes with it from the paint store! It will tell you time between coats, whither you need to sand between coats and when to apply the clear if needed.
If its a single stage paint (meaning the clear and hardener are mixed as one) then you will just apply the right number of thin coats until it reaches the you are attempting. Then let dry and harden and your done. No need to clear it as it is already part of the paint.
If it is a 2 stage paint ( the paint and clear coat are applied separately) then you will apply x number of coats to reach the color you are attempting, then apply 1or 2 coats of clear and let it dry and harden. If you do not apply the clear then the paint will be dull. Clear is where the gloss comes from.
|01-17-2013 01:32 AM|
|01-17-2013 01:19 AM|
|Moose5||someone told me to put a layer of clear coat after to make it last. i used glow in the dark paint for my vent rings|
|01-17-2013 01:02 AM|
|appleman46||I used krylon spray paint. It's made for plastic.|
|01-16-2013 11:23 PM|
|AlTruz||I bought the gecko green oem paint and plan on doing it in the spring. Don't know what type of finish to put over it though.|
|01-16-2013 09:57 PM|
|Jakebar777||I haven't painted it yet but I'm looking into it. Do you have any suggestions?|
|01-16-2013 09:54 PM|
|appleman46||I painted mine a gloss black about 4 months ago and it still looks good, no sign of wear and tear. What kind of paint did you use?|
|01-16-2013 09:52 PM|
Interior paint job?
I've recently found out that you can paint several parts of your interior. Like the speakers, door handles, glove box handle and more. I've also heard that the paint doesn't stick and can be easily scratched off. Anyone have experience with this?