|01-09-2014 06:15 PM|
|01-09-2014 05:14 PM|
|tklein42||Great thread guys. I'm going to be putting a set of 55w 3000k HIDS in these. Lots of fog in Northern MN|
|12-11-2013 09:25 AM|
the 2014 footwell lights are pathetic. I will have to find some other LED option for there.
|12-10-2013 03:40 AM|
|12-09-2013 12:54 AM|
|Argent||Yup, the are surface mount LED's|
|12-05-2013 03:04 PM|
|12-05-2013 01:31 PM|
|Iron Clad Lou||ugh...ok...thanks!|
|12-05-2013 01:17 PM|
|Argent||the map lights in the mirror can't be replaced either - also soldered in|
|12-05-2013 12:33 PM|
|Iron Clad Lou|
|12-05-2013 11:05 AM|
if you opt for the license plate bulb too on the JKU
|12-05-2013 10:30 AM|
|Iron Clad Lou||
|12-04-2013 12:40 PM|
I installed these $10 H16 68SMD white LED fog lamps. direct fit w/ no mods. didn't have to remove the bumper or anything.
I honestly can't tell if they are any different. I guess I should have used the fogs more before I installed them.
on a side note, the $20 interior LED lamps I got from the same store are AWESOME. Way brighter.
|12-03-2013 07:58 PM|
|12-01-2013 01:21 AM|
|12-01-2013 12:03 AM|
|11-27-2013 10:20 AM|
|Iron Clad Lou||
|09-21-2013 12:10 AM|
|09-20-2013 11:43 PM|
H16 White 25 Watt CREE OSRAM LED DRL Fog Light Headlight Bulbs Ultra Bright K3 | eBay
|09-13-2013 02:04 PM|
|04-29-2013 08:49 AM|
|Wrangler1771||I used these LED's|
|01-17-2013 07:14 PM|
Do these come in yellow?
|01-17-2013 06:26 PM|
|calvarycoffee||thanks for the amazon link. I just broke a fog light bulb installing a winch. A nice find.|
|12-20-2012 07:12 AM|
|RB-10rubicon||i did the same upgrade to the pilot lights its worth the effort. and they throw decent light|
|12-20-2012 05:54 AM|
|12-20-2012 03:49 AM|
Here is the stock 12'/13' JK Fog bulb for cheap.
Amazon.com: Philips 12276C1 Premium PSX24W Headlight Bulb: Automotive
|12-20-2012 12:47 AM|
You could also try these drop-in Yellow LED H16 replacements if you prefer LEDs:
1. ignore the part about cutting the housing
2. These don't put out much light in Yellow, and the white ones are more like Floods than Fogs...
|12-20-2012 12:32 AM|
Here are some H16 yellow 24watt drop-ins that would work if you shave the tiny tab off the side:
Or, you can go the H3 glass replacement housing route, like me.
|12-19-2012 11:47 PM|
Oooooohhh me likey!!
|12-19-2012 11:45 PM|
Is actually called a "psx24w."
You can use a h16 bulb, but you have to cut off several tabs on the new bulb's plastic housing to get it to work.
Or, you can do what I'm doing and swap out the factory fogs with a glass H3 replacement housing, then use any H3 bulb of your choice. Details here:
If you choose to stick with the stock plastic housing and use H16 bulbs, be careful not to go any/much higher than 24 watts. Otherwise, you might end up melting the plastic!
|12-19-2012 10:26 PM|
|This thread has more than 30 replies. Click here to review the whole thread.|