Jeep Wrangler Forum - Reply to Topic
Jeep Wrangler Forum

Go Back   Jeep Wrangler Forum > TJ Jeep Wrangler Forum > TJ Tech Forum > HVAC blower switch lost detents?!

Join Wrangler Forum Today

Thread: HVAC blower switch lost detents?! Reply to Thread
Post Icons
You may choose an icon for your message from the following list:

Register Now

In order to be able to post messages on the Jeep Wrangler Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
Please enter a password for your user account. Note that passwords are case-sensitive.
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:


Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.

Additional Options
Miscellaneous Options

Topic Review (Newest First)
01-17-2013 07:50 PM
kjeeper10 Yep .. The fan motor wears and draws current the system can't handle. Eventually wires/switch burn up. Very common.
Actually the very first google search that led me to this forum

FYI- speeds 1/2/3 are through the resister.
4 is direct to the battery.
01-17-2013 07:47 PM
mjwithatj Sounds like what happened to me. The switch melts on the inside and the metal tab connectors move out just enough to not make a connection. Unfortunately you will need to buy a new switch. I recommend
KnoxOffroad - View topic - Blower Speed Switch Melted? Fix IT!
The above is a link to a writeup I did to add relays for all four positions. There is a writeup on wranglerforum somewhere to add a relay to one speed. The linked writeup is my first so forgive me if I made any mistakes but it fixed my problem.
Also, you can always run the blower without the relays until you have time to do a relay setup but you run a risk of melting the new switch as well.
Hope this helps!
01-17-2013 06:49 PM
Highway n Toad UPDATE: I have the high speed blower back, and the position detents, but not the lower blower speeds, 1, 2, or 3.

I took the instrument panel front off and unplugged the wire harness from the back of the blower switch. It looked clean but I wiggled it back and forth after I plugged it back in. Even without power I could feel the detent switch positions had returned. Weird. When I put it back together and turned on the ign switch, I got it to blow on high speed! <golf clap>

At least now it seems to resemble some of the symptoms of other posts. And now I can make the long commute to work tomorrow without shivering to death!

Any input would be appreciated though. Taking it to the shop is such a pain...
01-17-2013 04:43 PM
Highway n Toad
HVAC blower switch lost detents?!

Why can't this happen in May?! I can no longer turn on the blower for the heat. It seems to have lost the detents; switch just whirls from low fan to high position without locking in. And none of the positions activate the blower, not even the high. Brrrr!

I checked the simple stuff: 10a Fuse behind glovebox checks out fine. Relays under the hood seem ok. I pulled off the switch and its not broken or spinning on the axis - its moving the axis its coupled to.

Has anyone experienced this?

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

All times are GMT -5. The time now is 11:22 PM.

Jeep®, Wrangler, Liberty, Wagoneer, Cherokee, and Grand Cherokee are copyrighted and trademarked to Chrysler Motors LLC. is not in any way associated with the Chrysler Motors LLC