|01-18-2013 04:50 PM|
Thats how mine was before I got my new bumper, used one hole that was there and drilled the other..
|01-18-2013 04:08 PM|
|01-18-2013 03:45 PM|
|sevenservices||I had 2 GM hooks on the back, just under the bumper on the bumper mounts of the YJ. It only took two times of me climbing a hill on an angle and having them dig into the ground and I took them off. Scared the crap out of me the first time I rode up the front left onto a ridge and the right rear hook dug into the trail. Pinged through the frame like I broke an axle or something!|
|01-18-2013 03:37 PM|
|tallzdatank||thanks. if they become an issue hanging up, or bow the frame I'll move them up there, but for now I think 3 grade 8s should hold it together.|
|01-18-2013 03:21 PM|
|01-18-2013 03:13 PM|
rear tow hooks.
got some universal tow hooks to bolt on the rear, found I had only one pre drilled hole for them back there, the bumper mount. so I drilled and tapped one more on the frame and did a bolt and nut on the small strip of steel on the bottom of my bumper. how did anybody else do it? I know that might not be the best place to put it.