|01-22-2013 04:08 PM|
|Imped||Why would one think poly flexes better than rubber?|
|01-22-2013 03:26 PM|
|00tj2||Look at prices. The complete control arms might be cheaper or equal to the aftermarket bushings.|
|01-22-2013 02:59 PM|
I figured a nice aftermarket set would allow more flex or something, but i don't know, hence why i'm on here
i'm going to look at the ones your talking about,
|01-22-2013 02:48 PM|
Aside from OEM, maybe these:
Energy Suspension Hyper-Flex Master Kit System, Black Bushings 218107G
Hyper-Flex Master System 1 Lift Black 218106G
|01-22-2013 02:47 PM|
if you're looking to replace all the bushings, stick with the stock Clevite style bushings. don't fall for the poly bushing crap.
Just a FYI, all the Clevite bushings are press fit. It's generally easier to replace the whole control arm or track bar than it is to replace each bushing.
the sway bar mounting bushings are easy to replace, again, stick with normal stock replacements from Moog, or your brand of choice.
|01-22-2013 02:40 PM|
|01-22-2013 02:32 PM|
|thuddles||Well I know the bushings are shot in my control arms and other ones that i find seem cracked... i haven't done anything to this jeep and its a 99 so i figured 14 years might be time|
|01-22-2013 02:30 PM|
|01-22-2013 02:24 PM|
So thanks to all of you guys I've got a pretty good idea of what i'm going to put into my jeep. I believe my first step is going to be to replace all of the bushings, control arm bushings, sway bar bushings, and any other bushings really. I've done some research but I can't seem to find any reviews. !!
I'm planning on replacing springs and shocks, only a 2" lift, so i'm keeping the stock control arms. any recomendations? good and bad reviews are welcome