|02-26-2009 05:43 AM|
I just did this over the weekend but with a frame swap instead of moving motor mounts due to some severe rot around the rear shakle mounts and me being too lazy/inexpierenced to weld. (though no beleives me.... Yet, pics to come) its a ton of work but we did it with 4 guys in 3 days. We didn't do anything else in those 3 days. In fact we barely stopped to eat. It you have the means and get a good deal I'd say its worth it.
I had a donor yj pile in my garage when we started so almost everything was right there for me to use.
|02-25-2009 01:49 PM|
Maybe this will help:
Last year a friend of mine swapped his 94' over. He found a rusted out 94' with a 4.0/ax-15. with about 70,000 miles that ran well but was needed frame repair. He swapped everything over by himself in 2 weekends. he guess's about 35-40 hours total. He bought new motor mounts and welded them into place and after that plug and play. pretty straight forward. Eventually I plan on doing something but right now I am in the middle of restoring and swapping in a 350 TBI,700r4 in my 82' scrambler,so not on the top of my priority's.
but the reason I am mentioning this is for 35-40 hrs of labor you could swap in a v8 and be much more happy with the result.
Thats my 2 cents.
|02-23-2009 05:37 PM|
here's a good read and laugh
|02-23-2009 05:32 PM|
|02-23-2009 05:28 PM|
|LBJ||do you know if the trans from the 2.5 will bolt up to the 4.0? figured on finding a donor vehicle to swap the wiring and acessories. was going to put a reman motor in it when the 4cyl gets tired.|
|02-20-2009 04:32 PM|
|jeepster213||but it would be better to swap a 6 cylinder into a 4 cylinder jeep. being that a 4 cylinder has 4.11 gears in the axles as a 6 cylinder has 3.73. i have a 89 yj with a 2.5l which i'm picking up a 95 cherokee to swap it to a 4.0l. so if i remember to bring my camera when i do it i'll post a write-up on the swap. the major part of the swap is cutting the motor mounts and moving them forward.|
|02-20-2009 07:01 AM|
|4Jeepn||Depending on how much you have invested in the current jeep, it might be better to sell it, and buy a YJ with the 4.0L and auto already in it.|
|02-20-2009 06:47 AM|
|flattietj||ur very best bet is try to find the same or similar year motor/tranny/tcase harness and computer....otherwise there will be splicing....|
|02-20-2009 06:26 AM|
|yjwrangler||hey dave where are ya buddy??? here is another one!|
|02-20-2009 04:40 AM|
|LBJ||Will the harness from the cherokee work on the wrangler? Will the trans from the 4cyl. bolt up to the 4.0?|
|02-19-2009 11:31 PM|
|1BLKJP||Your easiest bet would be to find a motor from a 96 Cherokee. All of your gauges will work and if you can get a hold of the whole wiring harness it's "mostly" plug and play.|
|02-19-2009 07:35 PM|
2.5 to 4.0 swap
Have a 95 yj with a 2.5 and auto. Want to switch to a 4.0 motor, Anyone done this and what do I need?