|01-26-2013 09:37 PM|
|Trevor C 98tj||Sorry was at work, in my jeep on the first pic, the bottom wire that goes through the rubber thing isn't there lol its only the rubber gasket|
|01-26-2013 03:59 PM|
|klessa||Okay, I know everyone has been on pins and needles waiting to hear about my firewall crisis. I finally found the spot -- to the right and above the gas pedal, although I could never manage to work the plug completely out of there. I ended up drilling a nice little hole through the rubber gasket and now I'm (finally) on to the fun part, wiring. Egads. Thanks.|
|01-26-2013 02:46 PM|
Not where the steering wheel itself goes, right?
|01-26-2013 02:35 PM|
Here -- the smaller black gasket on left, is that the one?
|01-26-2013 02:26 PM|
|01-26-2013 02:25 PM|
|Neil F.||Right by the steering column there is a large rubber gromet where the main wiring goes through. I don't remember if I went through the gromet or pryed it aside a little to run wire next to it. Any which way, you are also going to need some thin rod with string attached to push through the pull the wiring through.|
|01-26-2013 02:08 PM|
|Trevor C 98tj||Yes sir, If I could post pics, I would show you|
|01-26-2013 01:56 PM|
|01-26-2013 01:45 PM|
|Trevor C 98tj||Theres a hole that you have to pop out a rubber thing right behind where the clutch would be.. it is on my 98 not sure about others|
|01-26-2013 01:41 PM|
Where to go through firewall
I asked this in the middle of a thread concerning wiring some lights... but thought I'd post here as well. On a TJ, where do you recommend going through the firewall with wiring? I assume there's a place already used for some passthrough which would be good to re-use for this purpose but I can't find it.
I don't have the ability to put my jeep up on a rack at this point, so it has to be something reachable just through the engine area. Can someone walk me through where and how to get some wiring through the firewall?