|02-20-2013 05:14 AM|
|craigwieck||I am going to get it up on the lift at work and take a look. I will see what I can fab up. I will post Some pictures when I get it done.|
|02-13-2013 07:44 AM|
There is an unused hole up underneath the front valence thingy that makes a convenient spot to mount a flat bracket - the standard kind they sell at most SL shops works fine. We used a nylock so we could snug it down without cranking on it, allowed us to simply spin in out of the way when we didn't need it, but would hold it out away from the bumper enough to avoid rubbing on the cheap plastic bumper cover when the flag was mounted.
The hook mounts also work well if you tighten everything up enough.
|02-12-2013 09:09 PM|
|02-12-2013 08:49 PM|
|01-27-2013 08:05 PM|
|craigwieck||I like the air chuck idea. Thanks.|
|01-27-2013 10:09 AM|
|Brad48178||I used an air chuck for quick release and attachment.|
|01-27-2013 10:03 AM|
|MrJones944||The shops near the entrance both sell mounts that can be attached to the tow hooks on the front. Think they charge about $20.|
|01-25-2013 12:03 AM|
Silver lake flag mounts
What is every doing to mount a flag on the front of there jk's for silver lake. I want to make something up and am looking for some ideas.