|04-14-2009 01:29 AM|
|03-03-2009 04:15 PM|
no one that I know of makes any body mounts
they are not to hard to make just make them
|03-03-2009 04:05 PM|
True the "Clamz" are just protection for the body mounts.
Try Sniper Fabrication or Trent Fabrication
|03-03-2009 03:21 PM|
Thanks but I think those act as armor for the brackets... they are not the brackets themselves that weld to the frame. I'm looking for brackets that weld to the frame. But I think I've got an idea... 3x3" square tubing cut in have and weld those to the frame.
Thosec clams look like a good idea though to protect the brackets though.
|03-03-2009 03:19 PM|
|03-03-2009 02:31 PM|
|Cheech66||No that seems like a usefull modification (kilbytj body clamz) anyone used these and have any input good or bad on them!!|
|03-03-2009 02:27 PM|
|Cheech66||Now thats a mod!!|
|03-03-2009 02:01 PM|
All J Products - Kilby TJ Body Clamz
|03-03-2009 01:35 PM|
i checked with blue torch fab and also Genright. They both plan on making something in the near future but don't have anything yet.
I've got the part numbers to the factory frame brackets though...
5003831AA for the middle bracket and rear-most side frame bracket
5003836AA for the front-most side frame bracket
now I just need to get the bushings/sleeves and bolts
|02-23-2009 02:04 PM|
|4Jeepn||try blue torch fab...|
|02-23-2009 01:45 PM|
cutting off and raising body mount brackets?
I need new TJ body mount brackets... the six that run along the side of the jeep frame rail. We are cutting off the old ones and will weld new ones an inch higher up on the frame (no more body lift). My fabricator can make new ones but would be nice and convenient if they were premade and I could just order them. Anyone know where new body mount brackets can be found?