|01-31-2013 04:31 PM|
|Zenda||Thank you Blastek your information is very helpful!!!|
|01-31-2013 01:57 AM|
As for the change into 2nd, it's quite difficult in this transmission. A lot of people, including me, get a "crunch" when you go for 2nd gear. you can get around this by shifting from 1 to 2 at around 2500-3000 RPM. Another way to help it is if you pull it out of 1st, then press it against 2nd gear for half a second (but don't slip it in) and then go all the way. Kinda a 2 step motion.
|01-30-2013 09:09 AM|
|Zenda||Thank you Blastek for this every helpful info, cause the noise stopped when I started driving and I do have a manual which going into 2nd is a little hard. It's just disappointing to have these problems so early on|
|01-29-2013 11:49 PM|
If it's not a belt, I can think of two things:
- There is a known defect with the water pumps that can cause a squealing/chirping noise (more on the chirping side) . They're on national backorder, it's a simple fix.
- If you have a manual transmission, the throw out bearing in the transmission may be faulty. If the noise goes away when you push the clutch (if you even have a manual), you know this is the issue.
|01-29-2013 10:46 PM|
|Day Dreamer||If the dealership is close to you I don't see any harm in having them take a look see. When you say squealing, belts come to mind as well. Sorry wish I knew more. Squeaking is a pretty vague noise|
|01-29-2013 10:02 PM|
|Zenda||Anyone advice is helpful|
|01-29-2013 09:58 PM|
2013 jk 2kmiles making loud squealing noise ALREADY
Anyone have any idea why I would've heard that
The jeep was idling for about 15 mins
Belts were dry, dry area.
And irraciticly the belts or something started
Should I complain to the dealer as its still fairly brand new