|Yesterday 03:35 PM|
|beefySquirrel||Ordered a hood latch lock and put my .357 by the door overlooking the Jeep.|
|Yesterday 11:30 AM|
|91yj4banger||Put new muffler and tailpipe on today. I can hear myself think again lol|
|12-26-2014 10:55 PM|
Ugh. Where to begin. Here is the last few days.
Remove BA10, remove oil pan, change rear main seal and oil pan gasket.
Hey, let's change the slacked out timing chain while we are here.
Got that done so let's fix the lower radiator hose bung, cleaned, soldered, done.
Install the 4wd shifter from the BA10/NP231 (yup my 87 had an NP231) onto my new AX15/NP 231 combo.
Pretty easy, flip the plate over that connects to the TC and make a small clearance dent in the mount plate and it bolts on.
It even works!
Tomorrow hopefully pop the combo in and find a shop to shorten my XJ front double carden driveshaft and maybe go work in the yard or something...
|12-26-2014 07:46 PM|
|RawhideClab||Adjusted my my gas pedal... Feel like I gained 20hp! I was hitting the floor before my TV was full open.|
|12-26-2014 07:19 PM|
Used these to keep my wiring for my winch and other electrical needs clean
|12-25-2014 04:08 PM|
|xjrjrx||Installed new Christmas presents the winch and high lift jack|
|12-24-2014 10:35 PM|
I didn't want to disassemble the dash further to investigate at that moment. I'll tackle it again another day.
|12-24-2014 07:20 PM|
|12-24-2014 07:08 PM|
|12-24-2014 06:46 PM|
Did the LED conversion in my dash. Couldn't get to the speedo and tach.
Pulled the rusted t-handle off my lift gate so I could order a replacement.
|12-24-2014 06:28 PM|
|4angels||Or, if you know how to do the clutch then I can come to your shop and we could make a day of it!|
|12-24-2014 06:28 PM|
|12-24-2014 06:27 PM|
|darcong||Packed up and taking the beast into the wild for a weekend of Christmas camping!!! Ho ho ho everyone!!!|
|12-24-2014 08:53 AM|
|12-24-2014 12:18 AM|
|12-23-2014 11:37 PM|
|4angels||Did the LED conversion on the dash tonight. Wow what a difference.|
|12-20-2014 12:25 PM|
|12-20-2014 04:22 AM|
|12-19-2014 11:00 PM|
|Twojump36||....and new HD 30 Spline Axels...|
|12-19-2014 10:54 PM|
|Twojump36||Front and Rear ARB's... Compressor.... New U-joints... and they threw in a pretty cool diff cover...|
|12-19-2014 10:36 PM|
Light Mod today
Added 2 yellow 4-led light pods for added light, pulled leds from an unknown Ford donor.
|12-19-2014 09:44 PM|
Went to get it inspected... found out that your parking break has to work to get an inspection. Also found out that my horn stopped working and my left turn signal wasn't working on the dash
Brought it home tightened the brake cable, put new LED bulbs in tachometer and speedometer (since I had the dash apart), swapped the "shift-up" bulb with the left turn bulb and cleaned up the contacts for the horn. Nothing to exciting but it had to be done. And it reminded me why I love older vehicles! Everything was self explanatory and easy to fix!
|12-17-2014 11:11 PM|
Drove it home this past Sunday 12-14. It's under the Christmas tree.
|12-17-2014 09:15 PM|
|ArcsnSparks||Ran some Marvel Mystery oil thru her and then changed her oil and filter. Did the little spacer trick for my cad unit and fixed a couple of other minor issues. Slowly but surely running thru my " gig " list.|
|12-17-2014 06:05 PM|
|12-17-2014 09:38 AM|
New dash speakers!
|12-16-2014 11:08 PM|
|12-16-2014 09:39 AM|
So one of many things needing to get done on the 90 yj was the drivers side floor pan. I really didnt want to buy a preformed replacement i really wanted to get hands on with this fix. Went to Home Depot and bought some sheet metal and had some fun last night.
Still needs some more weld clean ups but it looks pretty good i think.
|12-15-2014 02:52 AM|
|freonburn||Lit up for Xmas parade over the weekend|
|12-15-2014 02:45 AM|
|This thread has more than 30 replies. Click here to review the whole thread.|