|02-13-2013 04:44 PM|
|JerryJeepster||I'm installing fogs in my ace rear bump. I will use factory fogs and need a wire harness to hook them directly to the reverse lights. Anyone have a harness they're not using? Or know where I can get one without having to purchase the full kit with the light/blinker stem? They want $125 for the entire kit. Is this average pricing?|
|02-12-2013 09:50 PM|
|02-12-2013 08:34 PM|
|JGreen06TJ||I installed the multi-function switch for my 06X that had the wiring harness but did not have a switch. MANY on here recommended wiring a separate toggle switch but I preferred the column mounted multi-function switch. Don't forget the relay in the fuxe box in the engine compartment. Without adding the relay the fogs still won't work.|
|02-12-2013 08:06 PM|
|02-12-2013 07:59 PM|
yeah i opted to go with the kc kit...that comes with a new harness relay and switch...it was only 15.00 more expensive then the lights themselves thanks tho
|02-12-2013 06:34 PM|
|Luck881||You'll need the 03(I think)-06 MF switch, older jeeps had a dash mounted switch. Also need to ensure the relay is there. The owners manual will tell you where it should be.|
|02-12-2013 05:28 PM|
Just got the Jepp back from the dealership, New Rim, 2 new Tires, New radio, and a new belt and tensioner later! I just checked and i have the harness connectors under my blinker...but my headlight switch does not pull out or push in...if i install the fogs do I need to run a switch for them or will they work off my headlights?
(ps, i bought the rugged ridge lightbar kit with the bar 3 lights and the harness and switch...is it possible to run those fogs to this switch or no?
|02-08-2013 06:06 PM|
and those some with the proper mounting for the factory bumper spot?
|02-08-2013 06:03 PM|
|TCogley||i was thinking about just doing the kc 1133's in the factory spot, but i guess ill just wait until i get the car back from the dealer to order those! thanks guys|
|02-08-2013 06:00 PM|
|WVU Mountainman||I installed KC daylighter 130 watt. Came with a harness. Super easy to install and I hate Electrical stuff. Very bright, I love em|
|02-08-2013 04:22 PM|
|AFJeep||Bought a 06 TJ X several years ago. Put fog lights on. I did find the harness along the inside edge of the fenders behind the turn signals. I bought a used multi-function light switch from Davey's Jeep, which is how you turn on the Fog lights if factory installed. Also had to purchase the fog light relay. Then I bought a new PIAA Fog light kit (they look so much better than stock) for my Jeep. A complete harness came in the kit, but I didn't use it. I also installed factory Cruise Control, 06 Sport wheel/tires and the premium sound system. A work in progress.|
|02-08-2013 04:22 PM|
|02-08-2013 04:18 PM|
|Phil.Dye||On my rig the headlights do not need to be on, but the parking lights do.|
|02-08-2013 04:17 PM|
|02-08-2013 04:08 PM|
|02-08-2013 04:01 PM|
|Rude Dog||If equipped, it should be @ the very end of the blinker arm. The very end part should "Pull out & push in" (on/off)|
|02-08-2013 04:01 PM|
|Mulvihill64||No, the jeep will not have the wiring harness if it did not come with factory fogs. If yours was wired for fogs most likely you will still have a switch for them. If not, check out the kc Apollo pro kits, as they come with a full harness that is very easy to run. Here's a link to them http://www.quadratec.com/products/97048_3512.htm|
|02-08-2013 03:45 PM|
what about a switch...does the factory headlight switch control the fogs? or do i need a switch now that has a fog feature?
|02-08-2013 02:57 PM|
|02-08-2013 02:36 PM|
|02-08-2013 02:29 PM|
|CarolinaBound||You don't own a car. You do have a jeep/rig/wrangler/nickname though. And the harnesses should be dangling down or tape up somewhere...70ish% sure|
|02-08-2013 01:48 PM|
Bumper Driving/Fog Lights Question?
I just recently bought a 2006 Wrangler. If you see my previous posts youll see that its still at the dealer since they left a wheel loose, so they are replacing the rim and 2 new tires. My car DOESN'T have the fog/driving lights mounted on the bumper. I am new to Jeep's I was wondering if all Jeeps come with the harness for those lights even if they aren't on the car...can I just buy replacement Fog/Driving lights and will I have the harness there or will i need to get a harness as well, any help would be awesome, thanks guys!