|02-08-2013 06:49 PM|
|Big Cole||If you are lucky then you will have access to hammer the broken studs out of the wheel hub without moving it from the rig. On my 99, I had to remove the hubs to gain enough room to install the new studs. A nationwide tire retailer overtightened my lugs and I had to replace 15 out of 20 on my rig.|
|02-08-2013 06:10 PM|
|572||Typically wheel studs can be hammered out. You hammer them in and they will fall out the back side of the flange.|
|02-08-2013 05:59 PM|
|Atthehop||Not sure how but be sure to replace all five studs and torque the new ones. I am sure they used an impact gun at some point.|
|02-08-2013 05:28 PM|
Front wheel studs broken
Seems the PO overtightened the lugs on the front, and I broke 2 trying to remove wheels.
Do these come out, and can anyone tell me how?
Thanks in advance for any input concerning my dilemma