|02-15-2013 03:21 PM|
|jeepwrangler0||no i am not|
|02-14-2013 01:13 PM|
|kfdjason7620||Are you locked in the rear?|
|02-14-2013 12:23 PM|
|jeepwrangler0||they are wearing down evenly across the whole tire but i just noticed the rears are wearing a tad more than the fronts|
|02-14-2013 12:17 PM|
|kfdjason7620||Are they warring on the outside, inside, middle, or uniform. I noticed that my km2's were starting to wear a little on the outsides so I started adding a couple of pounds of air. Now I am at 30 psi in the front and 34 psi in the rear. No more wear in 3 months now|
|02-14-2013 12:06 PM|
|jeepwrangler0||actually i just really got a good look at them and even broke out the tape measurer on them and the rear are more worn than the fronts not by much but they are more worn|
|02-14-2013 11:15 AM|
|TJMadness||I'd say get your alignment checked|
|02-14-2013 09:50 AM|
|WXman||Hmm.. I don't know man. Like I said, I put about 10,000 miles on mine before I sold them and they looked brand new.|
|02-14-2013 06:54 AM|
|jeepwrangler0||32x11.5x15 on a cragar soft8 with 4in backspace... and i just gott the front end alligned when they put those tires on.. and the back is wearing the same way... they are all wearing evenely just fast|
|02-14-2013 06:51 AM|
What size you running? I ran them in 265/75-16 which was basically 32x10.50 and I had great luck with them. They were very tough tires, and they wore perfectly as the miles racked up. I loved them.
I bet your alignment is way off in the front end. Either that or your wheel size doesn't match tire size very well.
|02-13-2013 09:29 PM|
mastercraft m/t excessive wearing
so i got the mastercraft m/t about 4 months ago an i have put about 3000 miles on them and they already are showing a lot of wear... im running them at 28psi... just wondering yalls input and just asking if there is anything i could do to help the wearage slow... maybe change the psi?