|02-16-2013 10:30 PM|
|02-16-2013 09:54 PM|
I am SO GLAD for this thread!! I am going to eventually change out my stock bumper to a Hansen Stinger -- but in the mean time I wanted to get the most out of my stock bumper for a while.
Today -- I went out and bought this kit and this afternoon my husband and I put it on. It looks GREAT!! Thanks for a low cost solution!!
|06-03-2012 03:44 PM|
|Akinvegas||I have had for a year on my 2010 drive thru fields woods and still as tight as they day I installed|
|06-03-2012 03:41 PM|
|06-03-2012 03:38 PM|
|1Topp||Lots of good info here > http://www.wranglerforum.com/f33/fro...er-118050.html|
|06-03-2012 03:09 PM|
|JeepGuy94||Hey all. I'm thinking about installing these on my jeep as well. What is the process to installing these on my jeep? Thanks|
|03-07-2012 09:04 PM|
|agenbro||no rattles here either... even in the high kansas crosswinds...|
|03-07-2012 09:02 PM|
|ShaunWV||I have the VDP's. Great product, no rattles.|
|03-07-2012 08:59 PM|
|pasteris71||I have them and between riding on the highway or off road not so much as a peep.|
|03-07-2012 12:43 PM|
|kjeeper10||Same as Mike|
|03-07-2012 12:40 PM|
|MTH||I've got the Rough Country stubby bumper kit--it's the same concept but looks a little different. It's been on for a few months now with no rattling.|
|03-07-2012 12:38 PM|
Thanks for the reply guys. I'm glad to hear they fit snug, not sure how that guy was having an issue.
|03-07-2012 11:53 AM|
I used to have them too and had no problems with rattling. They are snug and have several plastic rivets to hold them on. Since cutting is involved, maybe the person on the thread you saw cut too much or not enough or lost a rivet or something.
|03-07-2012 10:43 AM|
|walker111||I had it, never rattled for me.|
|03-07-2012 10:35 AM|
VDP Stubby Bumper Question
New Wrangler owner here, gearing up to start doing some mods in the next month or so, mostly on the cheap side. A while ago I saw someone mention (different forum I think) that they had installed the VDP stubby bumper kit, and they were having a problem with them rattling too much.
Has anyone else had this problem? if so, what was the workaround you did.
Vertically Driven Products 31550 - VDP Stubby End Cap Kit for 07-12 Jeep® Wrangler & Wrangler Unlimited JK with OE Bumper - Quadratec