|09-16-2013 02:17 AM|
|02-16-2013 10:28 PM|
|EMTJEEP||Check DDMtuning they have the wiring you need to make it not a read an open circuit and error eliminators.|
|02-13-2013 12:05 PM|
read http://www.theretrofitsource.com/pdf...on_Harness.pdf and look for trouble shooting section.
|02-13-2013 10:43 AM|
|caryt||I'd make sure you use a Hid Projection module in the housings of your choice..not just stick a set of bulbs in...|
|02-13-2013 09:23 AM|
Cool. I'm getting on it right now and hopefully can get that some this wknd.
|02-13-2013 06:03 AM|
|thelinux||go to retrofitsource.com and buy mopar specific h13 harness. thats what i am using.|
|02-12-2013 11:49 PM|
Since HIDs require much less amperage than halogens, you may be able to get by with adding capacitors to the factory harness, but I don't have a definitive answer.
You could call SMS and ask for Ray; he is their wiring guru: Susquehanna MotorSports - Auto Performance Products Catalog
|02-12-2013 10:36 AM|
|02-12-2013 08:54 AM|
|02-11-2013 11:46 PM|
You will also need capacitors and diodes to "defeat" the PWM voltage from the factory harness.
When I did the Cibie upgrade, I used the factory headlight harness to trigger. Since the TIPM doesn't get a return signal on the factory harness, it will set two trouble codes, one for each headlight. Will not cause a CEL or any other malfunction. You won't know they are there unless you scan for codes.
|02-11-2013 11:42 PM|
|thomm99||On every good Jeep forum the HID post has to come up. It's highly illegal, you will go to jail, and kittens will die. And using a relay kit works without any issue. Please remember to adjust your lights down a bit. Especially if you have a lift.|
|02-11-2013 11:29 PM|
Technically none of these options are legal as the Hella and Cibie headlights are a euro spec not a US spec.
There is an option for HID headlights that is done correctly. Rallylights.com has an HID projector kit that replaces your entire headlight housing. They have an odd look (kind of a bugeye thing) but supposedly work very well. They are also one of the more expensive options.
Susquehanna MotorSports - Auto Performance Product
|02-11-2013 10:42 PM|
Maybe I misunderstood your question.
|02-11-2013 08:03 PM|
interesting reads but remember i said im only doing this if i can retrofit.
now can anyone please answer the question?
|02-11-2013 07:01 PM|
Here's the straight dope.
Daniel Stern Lighting Consultancy and Supply
|02-11-2013 06:26 PM|
|Dusthol||Mega light thread covers hid. Check it out.|
|02-11-2013 06:17 PM|
My understanding is that you cannot make this legal using the stock reflector. One example here.
Scroll at the very bottom of that web page.
Flat Head Screwdriver
T10 Torx Driver
-->>For off road use only.<<--
Lighting experts may want to throw in their 2 cents.
|02-11-2013 06:10 PM|
(07 4 door rubi)
NOTE: i intend to do my HIDs the legal way but before i can start my retrofit project i would like to know it can in fact be wired the right way.
i want to install the HID kit H13/9008, 5k color temp with a wire harness. i know the computer will sense an open circuit, can i eliminate this by installing a second wire harness also straight to the batt to close the circuit?? have anyone done this? i know i will have 2 extra sockets but i dont mind that.
has anyoine done this??
thanks in advance.