|02-17-2013 08:01 PM|
|02-17-2013 07:44 PM|
|02-17-2013 07:30 PM|
I called a buddy that makes up hyd hoses. But he said he didn't have any ends or a cheep way of getting the stainless line.
|02-17-2013 07:26 PM|
|tailhole||Yea. I have a short flexible line about 8in long from the caliper to the hard line. That is attached with a bracket at the spring pad.|
|02-17-2013 04:11 PM|
If you are interested in a set, I can make them for ya. I'm a brakequip dealer, google and check the website. Then if you are interested contact me J.P.M. Hydraulics inc, I have a website as well. My name is Eric give me a ring and I can go into detail what I can make for you.
|02-17-2013 02:27 PM|
|Black Magic Brakes||
If not, then it isn't very clean looking to run long flex line from the T block over to each caliper. If you can remove them, then getting some short ones made and adapting them to the hard line and banjo fitting isn't that difficult.
For the record, my line of choice when it is up to me are the Currie rear flex hoses for the disc brakes they sell. Good quality, just about the right length and able to be adapted to most anything resembling calipers on the rear axle.
Yes to your other question, those parts will work fine.
|02-17-2013 11:38 AM|
|Jerry Bransford||No one makes them because they're not needed in the rear.|
|02-17-2013 11:10 AM|
Really don't need any for the rear.
But I have them on the front and rear. Just not the little short ones one the ends.
And they feel left out.
I can't find any. Maybe no one makes them.
|02-17-2013 10:39 AM|
|doclouie||If you see how the brake line is routed you will see that you do not need to replace the rear line even with a large lift. Jump under the Jeep and you will alsee what i mean.|
|02-17-2013 09:51 AM|
Braided brake lines
Is there any braided brake lines for rear disk out there. Blaine?
If anyone knows you would.