|02-17-2013 09:40 PM|
|Irongrave||A stabilizer will only mask death wobble it can not prevent it. if you have death wobble something is wrong in your steering or suspension.|
|02-17-2013 09:12 PM|
|rgroesbeck1||I replaced mine with an OME from Quadratec. Nothing difficult to it. I loosened the nut on the tie rod end and whacked it a couple times with a hammer and it popped out (it is pressed in). Took less than 30 minutes total. Works great. I would not run without it, as you will likely experience the "death wobble" especially if you have oversize tires.|
|02-17-2013 08:33 PM|
|Irongrave||remove it and try driving without it. Its not really needed just makes it a little smoother on the road. I personally like the steering feel with out a stabilizer but that's just me.|
|02-17-2013 07:36 PM|
|Pink_Percy||Monroe SC2928. It's a direct replacement. Any auto store has them.|
|02-17-2013 07:30 PM|
If I'm not mistaken, there should only be 2 bolts holding it on. It should take less than 10min to replace.
You can get a new one from your local autoparts store or online Quadratec, 4wd, 4wheelparts. I dont think theres much of a difference in the variety and theres no need for a dual stabilizer setup.
|02-17-2013 07:29 PM|
|02-17-2013 07:24 PM|
Need help with steering stabilizer..
I just noticed on my 05 Rubicon that the steering stabilizer is leaking fluid. Can anyone tell me how difficult this is to replace, where would I get one, and what would be the recommendation. The jeep is pretty much stock with original size tires and i don't do any serious off roading.... just try to keep from getting stuck. Thanks for all your help.