|03-16-2009 08:08 AM|
|Scout||I ran a 315/75/R16 on mine and it was fine.|
|03-16-2009 05:19 AM|
|snwchris||Yea you'll be fine... it equivalent to a 33x11.50, you might rub at full flex, but you'll be fine|
|03-15-2009 11:10 PM|
|stevens243||Yep, just under a 33. You may get a little rubbing at full flex, but shouldn't be too bad.|
|03-15-2009 10:55 PM|
|4point||I'm going to say yes you can do it. The 285-75 is like a 32, 11.50 and it should fit fine.|
|03-15-2009 10:50 PM|
|03IncaRubi||TTT, any advice on this would be greatly appreciated! Sorry to be so annoying with this lol!|
|03-15-2009 10:18 PM|
|03IncaRubi||Anybody running this setup? I keep searching and can't find a straight answer lol! Thanks!|
|03-15-2009 09:29 PM|
Tire size help on my stock Rubicon wheels!?
Hi guys I just have a quick question. I have a 2003 rubicon. I have a 2.5" spacer lift and a 1.25 body lift for a total of 3.5" lift. I have the stock rubicon wheels. Can I run a 285/75/16 tire on this setup with the stock rubi wheels? I was looking at the Dick Cepek mud country MT to be more specific. I was told by a few guys that they run this setup and have no issues.
I just want to know if this size tire will fit alright, without any issues? I would like to stay away from spacers. I was going to order these tonight, so any help would be greatly appreciated! Thanks!