|04-19-2009 07:18 PM|
Yes the spacers I'm going to order are made for the difference in bolt pattern.
Also just had a friend come over and we tinted the windows while they were in, hes very good at it, I'm just an amature.
|04-12-2009 10:52 AM|
|04-12-2009 03:17 AM|
|dwdrums801||Iv done it before when I was installing my power windows...I cant remember exactly but I took off the triangle piece toward the front of the door and the U shaped channel thing that holds the window and it was just a matter of wiggling it and turning it. And making sure the window is not attached to the track anymore.|
|04-12-2009 01:33 AM|
|spanky||did you get those windows out yet??|
|03-30-2009 12:55 AM|
|J33P||Well here in ND, (Fargo might I add where we are flooding like crazy) it is 50 bucks a window. If I can save 90 bucks by doing it myself I sure would like to put that money towards a nother mod. I am busy lately helping sandbag so I will let you guys know how it turns out. Thanks, Jeff.|
|03-26-2009 01:31 PM|
|BSing||you could probably get two front windows tinted for 50 bucks and an hour out of your time. Must better than the satisfaction of taking your windows out and turning this into a whole weekend project.|
|03-26-2009 01:19 PM|
Don't feel bad man...I don't pay anyone to do anything on my Jeep. I get much more satisfaction from doing my own work....and it's cheaper! You may struggle with some projects, but the satisfaction IMO is worth it!
Good luck and let us know how you make out.
|03-26-2009 02:34 AM|
|spanky||oh, and welcome to the forum|
|03-26-2009 02:29 AM|
taken from thread: http://www.wranglerforum.com/f5/towi...oat-28233.html
you kinda just drive your vehicle to the install place, and they do the window tinting for ya... windows intact!
if youre struggling with a self install, all the more reason to take it somewhere. its not expensive at all.
trust me, i can appreciate trying to do it yourself, but when youre gonna waste a ton of time doing things the hard way ... especially with something so inexpensive.... well i think its time to pay someone else to do it.
|03-26-2009 02:11 AM|
|J33P||Well when I get some extra time, I'll have to post up on how to remove them. Thanks for trying to help anyway guys.|
|03-24-2009 02:03 PM|
|Giancarlo||that guys a professional.. this guys a do it yourselfer... im not sure how to remove em try calling dealer and ask|
|03-24-2009 01:17 PM|
|03-24-2009 01:12 PM|
|daanbc||You should have mentioned that before- about the tinting. I had mine done two weeks ago. It took the guy 17 minutes to do both, with the windows rolled up. I have no problem with the edges at all. You should be able todo the same.|
|03-24-2009 12:58 PM|
LOL, you guys are funny as hell. I like the brick one and the harlem one. Nice, hahaha. Anyway I want to remove them on my TJ (isnt this the TJ section?) to tint them properly. I tried with them in but the seals are a pain in the ass to get the tint tucked in there proplery. I would really appriciate some help on this as I would be very greatful, thanks and I hope to be around here a long time. I already have some 09 rubicon rims and BFG M/T's that are 32's on their way here. Also ordering wheel spacers and a 2.5 RC coil lift. Soon to be all installed.
|03-23-2009 10:44 AM|
|daanbc||Just leave it in harlem over-night. The windows will be taken out for you free of charge. Minus some other parts you may or may not need.|
|03-23-2009 10:35 AM|
|03-23-2009 10:16 AM|
i use this
|03-22-2009 11:19 PM|
|B86W05||it sounds like a TJ with full doors but i havent looked into how to remove the windows in mine since there has been no reason to|
|03-22-2009 11:18 PM|
|tiny terror||Yes, it makes car noises.|
|03-22-2009 11:12 PM|
|03-22-2009 11:10 PM|
|tiny terror||Oh. So my ear pressed on the computer screen isn't going to work then.|
|03-22-2009 11:07 PM|
|03-22-2009 11:06 PM|
|tiny terror||I can't seem to hear it.|
|03-22-2009 11:05 PM|
|03-22-2009 11:04 PM|
|mikes05unlimited||Sounds like a cherokee|
|03-22-2009 11:01 PM|
1 should be efficient for both windows. If you're good you can get both with one throw.
|03-22-2009 10:48 PM|
|tiny terror||Um..... what wrangler do you have and...... why are you removing the front windows?|
|03-22-2009 09:42 PM|
Removing front windows
Hey guys, I'm new here. My name is Jeff, I'm new to this Jeep thing. I used to have a 99 Dodge Ram Sport 4x4 with the 360 auto and extended cab. Sold it due to gas prices. Not new to forums though, I've been on many Dodge forums.
Anyway, my question is this... How do I remove the front windows? I already removed the door pannel, removed the screws from the window to the track, but I can not slide them back and fourth to get them out. I then took the 2 screws that hold on the triangle part off by the mirror. But if I slide this piece out, will I have enough room to get the window out?
Thanks for your help, and sorry for the long introduction.