|03-13-2013 11:14 AM|
Just remember on the ground strap that surface area of the wire is EVERYTHING! Braided or flat copper strap (wider the better) is best. Sprap paint or undercoat/Plasticoat over connections when done to prevent corrosion. I did this on my 102" whip to the chassis.
I'm a ex-mega-yacht now ship Captain with lots of experience in the importance of a good ground to plane. Good luck!
|02-28-2013 10:07 PM|
|02-28-2013 09:25 PM|
|eton||Its because you don't have a ground plane - CB transmits downward reflecting off the ground plane - mount it on the front so that your hood is the ground plane, it'll work better. Off course on the trail just about anywhere will work.... ground to the frame if possible, seal everything up so that it doesn't get wet. Just remember that the ground plane and ground are not the same thing.|
|02-21-2013 11:37 AM|
|aaronarmenta||I think running a ground strap into the tub and attaching it to sanded metal works?|
|02-18-2013 09:24 PM|
|02-18-2013 09:23 PM|
|BayLLC||Lol thanks and I won't... Just had today to work on it and tried to get as much done as I could in one day|
|02-18-2013 09:13 PM|
Yeah. Get jumper cables, place one lead on the bottom of your antenna mount (the collar that attaches the wire to the stud) and place the corresponding lead onto the frame. If it doesn't get better, youre barking up the wrong tree.
Have you measured your SWR?
I hope you don't bump it every 4 hours, lol.
|02-18-2013 07:28 PM|
|Magichelmt||I ran a line from my bracket, through the door with the antenna cable and to the bottom of the roll bar. I sanded down to bare metal on both ends and put a good metal to metal connection. I have no problems.|
|02-18-2013 06:27 PM|
|02-18-2013 02:23 PM|
I have my CB antenna mounted behind my spare tire and have it grounded to the bolt of the mount... Pics below... This is not giving me a strong signal so I'm thinking I need to get the ground down to the frame but I'm having trouble finding a clean way to do this with ought obstruction the opening of my tailgate