|05-07-2014 06:50 AM|
You are so welcome! I'm glad it helped. I'm currently trying to figure out what is wrong with my vents (again). They are only blowing out the drivers side window vent. Annoying as hell!
Also my completely new AC system I did last summer (compressor, dryer, hoses, o-rings and flush professionally done) ain't even cold. Thousand bucks at least on that one and it don't work worth a shit.
|05-03-2014 02:01 PM|
First, thanks a million to BurlySoldier for the photo and position recommendation. Luckily I'm only 5'9", so other than my side aching a bit, I completed the job in 30 minutes. I only had to replaced the upper defrost door lever (e Just a couple of tips for the future. Hope mine holds up!
1. Pliers did not work for me. I'm right handed I could get enough leverage. After banging up my left hand, I grabbed a L-shaped tool for pulling nails. First yank and it was out!
2. I had read that the omix-ada part numbers were backwards. I ordered both 17910.01 and 17910.02 from extremeterrain.com. Turns out, 17910.02, labelled the upper defrost door, was backordered. I went ahead with removing the broken piece from the door. I compared what came out of my 1997 and sure enough it matches exactly the 17910.01 part they sent me. So, if you are not getting air from your defrost vent, order 17910.01 as the replacement part.
|03-19-2013 06:26 PM|
|jbryant||I know this old shade tree mechanic that has an old ironing board that he made an adjustable leg for the wide end of the board. He would lay the board in the floorboard of the vehicle and adjust leg to the desired height. It made working under the dash a breeze.|
|03-19-2013 04:58 PM|
Are yours still holding up?
|03-03-2013 12:33 PM|
|03-03-2013 10:03 AM|
|s14sh3r||Man, that pic is awesome. Sums up working on a TJ quite nicely|
|03-03-2013 08:56 AM|
|CJ7GoldenEagle||Hopefully yours doesn't break again. That's the problem I'm having. I've fixed it twice already and they keep breaking. Glad you got yours fixed though.|
|03-03-2013 06:33 AM|
|BurlySoldier||Hahah, yeah I'm 6'2 and it still hurt but not as bad as ripping out most of the dash to replace a $13 plastic blend door arm. First I tried doing it with my feet on the ground and back bent on the door sill, I'm in good shape but that still crushed my back pretty hard. I don't know how guys normally fix this commonly broken part on the TJ but this is how I did it and once I figured it out it only took minutes. Even if you can't do it you can probably direct someone a little more flexible on what needed to be done.|
|03-03-2013 05:31 AM|
|wmdavis007||Ouch! Doubt my 6'5" big a$$ could fit like that either. Nice job!|
|03-03-2013 04:34 AM|
|SeVeReDiStOrTiOn||My body hurts just from looking at that pic.|
|03-03-2013 04:09 AM|
|BurlySoldier||Thanks fellas. Glad to have gotten that out of the way.|
|03-03-2013 04:08 AM|
|03-03-2013 03:19 AM|
|Sycboi||Wow man, good job. I couldn't fit like that if my life depended on it...|
|03-02-2013 10:35 PM|
|RepairMan||Off topic, do you like the hurst shifter?|
|03-02-2013 07:52 PM|
'97 TJ Fixed Blend Door arm today
With the assistance of the good people here on WF I was able to fix my broken blend door actuator arm today! During this time I was also doing an LED swap on my dash and gauges. Knowing the dash was going to be partly disassembled I figured it was time to fix this HVAC system.
I am posting this to help others who may suffer an HVAC that fails to blow through the correct vents. Mine failed to work on the dash vents but did work on the defrost and floor..
If you suspect the blend door arms are broken you should have already inspected all of your vacuum lines to make sure one of yours hasn't fallen off.
A particular culprit is the one located under the battery tray.
Alot of people solved their blend door issue by reattaching this hose.
If you haven't heard, this job can be extremely daunting due to the awkward positioning the blend door is, in relation to the dash. It is to the right and up from the gas pedal on a 97 TJ.
Upon inspection I found it was one of the two upper blend door actuator arms (yes there are two upper arms and one much lower). The lower arm appears to be a different part number (don't quote me).
I used this part, from this website-
Jeep Parts, Jeep Tops And Jeep Acccessories
Mine had broken off inside the blend door. Half of the arm was still stuck, broken and sunken a bit inside the blend door. To snatch it out, I stuck a long skinny wood screw into this remaining piece and ripped it out with a pair of pliers.
Once removed I installed the new arm and reattached the metal bar onto the hook end of the new arm. On top of that I reattached the locking washer.
I had heard and read about people removing seats and dismantling their dashes pretty extensively to do this repair. I had an easier time by getting completely upside down like so
Lol I know! Still pretty torturous but not as bad as laying on the door sill with your feet on the ground and cracking your back. This saved me what could have been alot of extra work and agony.
I hope this post helps some people out. I dealt with this busted heater/ac for a full year. Using this upside down maneuver I had this job done in about 40 minutes. Well worth it!