|03-03-2013 01:52 PM|
I sent ya a few PM's .. thanks for the help.
After digging the part number of the shock up on the net .. looks like my lift is over 3" so I ordered the spacers for the exhaust.
This thread was awesome and helped me out a ton!
|03-03-2013 01:10 PM|
|ramhunter9||BRB .. going to the shop to do exactly that ^|
|03-03-2013 01:08 PM|
If you jack up your Jeep and check it at full droop you'll be able to tell if it's gonna hit or not.
|03-03-2013 12:56 PM|
Hmm .. I just looked under mine and there was no spacers .. weird
I have TeraFlex shocks and the jeep seems lifted .. bought it that way so I have no idea how much lift it has.
Running 295/70-18's if that matters
|03-03-2013 11:25 AM|
|Ex Umbris Currus||Long piece is passenger side and short is drivers. I didn't follow the directions exactly...I used a ratchet strap and pry bar to pull back on the exhaust instead of popping the weld to slide it back.|
|03-03-2013 11:06 AM|
TeraFlex Install: 2012 JK Updated Exhaust Spacer Kit - YouTube
|03-03-2013 10:53 AM|
|ramhunter9||Anyone have a pic of what and where this spacer goes ?|
|03-03-2013 10:44 AM|
|RKracing||You do not need the spacer if you install a new front driveshaft upon installing the lift. The aftermarket driveshafts are a smaller diameter than the factory driveshafts and therefore will not rub all the metal around it.|
|03-02-2013 10:01 PM|
|kbwwolf||Eventually, you'll need new driveshafts, too.|
|03-02-2013 09:47 PM|
|Ex Umbris Currus||Put one on for my 2.5 inch lift|
|03-02-2013 09:42 PM|
|Sueby||I had to install one with my 3.5 lift.|
|03-02-2013 09:24 PM|
|daggo66||If you have a 12 or newer, they are correct.|
|03-02-2013 09:22 PM|
Exhaust Spacer on 4" Lift Kit
I spoke to an off road suspension store for installation for my lift kit and they said that an exhaust spacer is needed to complete the lift on my Jeep. Are they blowing smoke up my ass or do I in fact need one. Any help would be great. TIA!