|03-06-2013 01:15 PM|
Seems the multi function switch starts to go bad after a while....mine does a similar thing with high beams being finicky.
I may try to clean it internally, or buy new one.
|03-06-2013 01:08 PM|
|90DesertTanYJ||Fill out your profile, you are posting in the "general" forum. My YJ has a seperate dimmer switch mounted on the column with a rod that runs up from it that the wiper switch presses on when you move the multifunction lever. Any one of those things may be in a bind or out of alignment. Newer and older models have different methods.|
|03-06-2013 07:08 AM|
High beams are sticky
The high beam switch is VERY sticky. It turns on before the switch actually does. When i hit a bump, or even a turn signal it turns the high beams on. Also when they on it turns on the low & high beams at the same time.
Also my flashers don't work, not the caution blinkers, the high beam flashers, they just turn off my low beams if they're on; but i guess that could serve some good if i accidentally flash a cop he/she can't pull me over for 'failure to dim head lights'
Hope this info will help you help me. Thanks!