|03-07-2013 08:07 PM|
|Carolina||Ok i will try.that|
|03-07-2013 08:06 PM|
|Carolina||Yes i meant inline 6 lol it is a five speed manual and it has two shifters for the four wheel drive and kne fot the tranny.k|
|03-07-2013 06:16 PM|
|zidodcigalah||One is engaging four wheel drive, and other is for high and low speeds... The right should be for high and low if i remember good...|
|03-07-2013 04:52 PM|
|Carolina||If you mean an inline 6 yes it is. It has three total shifters two four the 4x4 and one for the 5 speed manual.|
|03-07-2013 04:25 PM|
are the two sticks for a twin stick transfer case? or is one for your 5 speed transmission and one your trasfer case? is your jeep and automatic or manual?
BTW..your 4.2 is an I6 not V6
|03-07-2013 04:17 PM|
|Carolina||But any idea which way is what?|
|03-07-2013 03:38 PM|
Usually the shifter on the left is for 2whl dr and 4whl dr and the one on the right for high and lo.
Here is a link that might help you
AdvanceAdapters.com | Engine & Transmission Conversion Adapters - Advance Adapters
|03-07-2013 03:28 PM|
Hi, I recently purchased a 89 jeep wrangler yj with the 4.2l v6. I am having trouble with the fourwheel drive. It has two shifters in the floor but no marks to know what is what. I have played around with it and can get it to engage just kinda weird config because both shifters an go all the way up and all the way down. Any ideas on what is what because I am lost here and really want to get in the mud where my jeep belongs lol. I installed the posi loc on it to rid myself of the vacuum woes as well. Thanks for any info.