|04-06-2009 04:14 PM|
|snwchris||NO, Droped Pitman Arm... but make sure you have the Adj. Front Trackbar, will help with keeping the axle centered.|
|04-06-2009 04:00 PM|
Like the other guys said, no dropped pitman arm is needed.
I'm running RE 3.5 springs and their smaller RE1600 trackbar and the steering is fine.
|04-06-2009 02:53 PM|
|04-06-2009 02:39 PM|
|4point||No a drop pitman arm is not needed for this lift. Its fine the way it is. Just do an alignment after the lift install.|
|04-06-2009 02:34 PM|
Lifted Jeep, Steering Fix
Hey guys. I've been doing a ton of research before actually doing any modifications, and I have everything pretty well worked out, but I'm running into one little issue.
If I put a RE 3.5 lift on, along with a JKS 1.25 body lift, what should I do with the steering? Will a drop pitman arm do the trick? Or will it take more than that? Because I've seen bigger kits that supply you with two large arms that claim to correct the geometry of your steering for lifted jeeps. Does anyone know what I'm talking about here? Any suggestions on what it'll take to get the steering right?