|03-11-2014 07:45 PM|
|gth522||How much MPG did you lose?|
|02-19-2014 04:32 PM|
you would also feel the extra power with the auto on the highway in passing or cruising.
and of course anytime you put it to the floor.
Its subtle under 3k rpm but its defiantly still there.
|11-15-2013 04:02 PM|
I love a big herd of thundering ponies under my hood as much as the next guy but I also love my 10A hood and I don't want to see bulges from pistons and valves poking through the hood when I unleash the fury of the herd. There are other vehicles much better suited than the JK of that.
According to the power curves published at the beginning of this thread the gains below 3000 rpm where most law abiding citizens usually operate are pretty mundane. Which means that if you have an auto the only practical situation where the extra ponies will show up is in passing situations in top gear unless you are in the habit of drag racing from from light to light. The few times I have come even close to redlining my Jeep off road was pulling out another Jeep that was stuck so that negates much value there.
I don't expect the instantaneous torque of an electric motor or even the low end of a diesel engine but I also would prefer not operate in the red zone of my tach. Setting spool up and whining noise aside, what am I missing here that has everyone so excited. Please enlighten me so I can be as excited and start saving my pennies for a purchase.
P.S. I like the lecture and animation on combustion engines but it is missing the forced air induction system which is the whole topic of this thread.
|11-15-2013 12:54 AM|
|shaunmagg||Can not wait for it to be released for the 2014's....|
|10-17-2013 11:20 AM|
Here's some climbing video!
Pentastar Supercharged Jeep Climbing Technique - YouTube
|09-12-2013 01:27 PM|
|09-12-2013 08:48 AM|
LOL that is pretty funny! That video shows the pure output of the RIPP. This one was done well. We have had some of our friends try this on "not so built" rear axles and ended up needing new shafts afterwards!
|09-11-2013 08:07 PM|
|09-11-2013 04:15 PM|
|woansleftpeg||Do RIPP own shares in Discount Tire? They probably should, I can see the one business having a direct impact upon the other in the coming months.|
|09-11-2013 03:44 PM|
|09-11-2013 02:00 PM|
2012 RIPP Powered JK Monster Burnout 37in Tires HEMI KILLER - YouTube
Yea, it's like that...
|09-08-2013 09:27 PM|
Yes I think for the most part if you are one of the unfortunate ones with the head issue it would have happened with or without this mod.
|09-08-2013 09:15 PM|
Here's my timeline.
My truck was built in December of 2011. Delivered Jan 13 2012.
So its an earlier 12. I never had a tick.
Put the SuperCharger on (UNTESTED) at about 10k miles.
RIPP my truck to develop the system map for manual trans jeeps. This means Dyno pass after Dyno pass as they played out every situation you could possibly be in on the road.
Then drove non stop cross country. There is no way your going to be harder on your truck.
Im at about 17k miles, I drive like a car thief, and there is no tick.
|09-06-2013 06:07 AM|
Cool mod. Anyone concerned about bringing on the Pentastar tick with this mod in a quiet 2012 that hasn't displayed the problem? Just wondering a bit.
|09-04-2013 11:07 PM|
Spots offroad where you think you need momentum, with the sc you don't. It continues to build power, just steadily climbing.
Goosing the throttle is all of our enemy. It's how thing break.
|09-04-2013 11:00 PM|
I just coiled over at rock krawler. My sc is turning 37s now.
The power is still there. I'm considering gears, I've got stock 4.10s
|09-04-2013 10:21 PM|
|Zybane||I am thinking about a supercharger. Has anyone cross-shopped the Magnuson root's type? It won't have the top end power of the RIPP, but should be better for off road down-low. Hard to decide! Down-low overall modest power gain, or mid-high large power gain.|
|09-04-2013 10:15 PM|
|UselessPickles||When are you going to get your jeep back on a dyno so we can get a nice full torque curve starting from low RPMs showing the results of the latest tune?|
|09-04-2013 08:53 PM|
|09-04-2013 06:27 PM|
|mjpjr45||Looks like a tire pressure sensor.|
|09-04-2013 06:27 PM|
|09-04-2013 05:51 PM|
|misturg||What is that yellow indicator light in the Tach?|
|08-27-2013 08:55 PM|
|08-27-2013 07:55 PM|
Here's a fun shot. Im on my way to Rock Krawler at 8am on the NY state thruway, I couldnt believe how fast traffic was moving. I could completely cruise at about 90.
Look at the RPMs. this is on 37 inch KM2s and 4.10 gearing. Ungodly fast.
I slowed down to take the picture.
|08-18-2013 02:18 PM|
Testing lauching a car I put together from a shell. Built engine, plumbing, suspension, wiring, and some fabrication. Had a turbo in it in 1998 and made 430hp and 470tq to the tire then but it was a street car. In the video its making 730hp and about 900tq on a small shot of spray, to the tire. On a friend's car, I have installed 3 different superchargers in one day on a dyno session to see which made the most power. All vortecs, a XX trim, XXX trim and a Z trim. I if I remeber correctly the XXX made around 1100hp. That was about 12 years ago though. Carry on.
|08-16-2013 02:14 PM|
|08-16-2013 11:47 AM|
|08-16-2013 11:03 AM|
Yeah... unfortunately, being meticulous about explaining the details is necessary to explain why a generalized misunderstanding is incorrect. Otherwise, I just end up making general claims myself without any backing evidence, essentially just saying, "No, that's wrong", and not providing any evidence.
Some people who write/read the generalized misconceptions don't really care whether they are correct or not, and will see the detailed responses as excessively/unnecessarily pedantic (with an attitude of "who cares?").
Some people are interested in the details of how stuff works and may find it interesting.
Some people participate in a mature way by challenging some details/explanations. I like when this happens, because it forces me to think/research deeper to either confirm my understanding to be correct, or I learn something new.
Some people understand stuff better than me and will point out incorrect details/assumptions. I like this too, because then I learn something new (but it requires that they back up their claims with evidence/citations or detailed explanations).
A meticulous discussion can lead increased understanding for those that care. Those that don't care about the details and don't care about increasing their knowledge/understanding are free skim over the details and abstain from trying to participate with unsubstantiated claims. The discussion degrades when someone tries to argue against the details without caring about reading/understanding the details, and with no interest in testing/improving their understanding/knowledge.
|08-15-2013 11:39 PM|
|COStrider||Pedantic- look into it|
|08-15-2013 09:54 PM|
|This thread has more than 30 replies. Click here to review the whole thread.|