|03-18-2013 10:54 AM|
If you have not joined the Early CJ 5 forum, DO IT NOW!!!!
Absolute best place for round fender CJ info through 1975.
Not to mention there are no adds so it runs like lightning compared to here.
|03-17-2013 09:50 AM|
|mikejoel||great restoration, is that the final build|
|03-16-2013 10:06 PM|
I needed more seat room too....
So I added 20" to the body and frame:
Little more than a weekend mod though...
Cutting into the wheel well will give you an inch or two, but eats up precious cargo space as you move seats rearward.
Took six months to do a full restoration job on my CJ, if I had only stretched it, I probably could have done that in a month... not nearly as hard as a lot of people might think. I bought a sheet of 16 ga steel and make all the new body panels. Then I bought some 2"X4" 3/16 tubing and made new frame rails.
|03-16-2013 08:51 AM|
I've got a boxed frame, 1" super lift, extended drivers seat and modified drivers wheel house. Also running 31x9.50 Super Swamper TSL radials. 15" CJ5 wheels.
I'm building a narrow offset Dana44 and Dana30 with lockers and discs.
Plus LED lighting. I'm using all LED lights so I can turn the lights on and not kill my battery. I did a 12 volt conversion but it still hurts it. I also did Pertronix Ignition and a single wire GM Alt.
|03-01-2013 09:21 PM|
|Tarby||Your welcome...I loved my CJ5. Have fun!|
|03-01-2013 02:55 AM|
YES! That is what I wanted
Now just Moveing the metal around and Make
it look good.
Thanks For The Link.
|02-28-2013 08:30 PM|
Go over to earlycj5.com and chech out this thread:
Wheelhouse notch - dimensions?
|02-28-2013 08:22 PM|
On mine...... actually cut out the fender well...... to fit seat INTO it...... then put sheet metal back in the hole...... not pretty.... but functional.....
NO PICS..... sorry...... no digital cameras or phones then.....
|02-28-2013 07:45 PM|
|RubiconRich||I've seen people bang in the sheetmetal behind the drivers seat.|
|02-28-2013 07:21 PM|
Who's got the modif. with pictures
Looking to Move drivers seat back. in CJ-5
Someone done this? Got pictures?