|03-19-2013 09:27 AM|
To be a direct swap ur lookin for an axle that is 60"wide wide, a lug pattern of 5x4.50
And if ur still spring under....then spring under purches ....I'm not sure of ur gears but unless u've changed them....more then likely there 3:54s
This is why the only real direct swap d44 is one from an Xj
Hope this helps
|03-19-2013 09:18 AM|
|Sikwitit328||Well I currently have 4.56 gearing so finding an 44 with that gearing is like a needle in ( ya know). So already planning a gear swap. Any preference on gear brand I should know?|
|03-19-2013 09:11 AM|
|91badass||Brakes, shock mounts, spring mounts are the easy fixes, You need to make sure the width and the bolt pattern, and gear ratio is what you need, thats the stuff that can cost you alot of money.|
|03-19-2013 08:57 AM|
|Sikwitit328||Well it's listed from an 86 87' Cherokee/Wagoneer. I'll confirm b4 takin the drive. I saw in another write up that they were having problems finding brake shoes that fit. Has anyone else had this issue??|
|03-18-2013 05:57 PM|
But if ur getting it from a Fsj wagoneer it'll be 6 lug....and ill need more info on the axle...they come in different widths...
Hope this helps..
|03-18-2013 05:34 PM|
|Gunner||If I remember right that ought to be a near bolt in. But you would most likely get a better answer in the YJ section.|
|03-18-2013 04:00 PM|
Swapping out the Dana 35
Hey guys, I found a d44 out of a 86/87 Cherokee/waggonerr . I'm lookin to swap out my D35. Can anybody let me know if this axle is compatible in a yj, and what all would needed to be done for the swap. Thank for any input!